the Outhouse has updated Elatua Limiter to v0.91 and Inerthia Compressor to v1.81.
Elatua Limiter changes since v0.36:
- Many optimizations to various parts made it faster.
- Changed the clip-meter so it works better. Much more accurate now.
- Fixed a bug were envelope times would change on higher sample-rates.
- Added an Operations selector. Works in Stereo, Mid Side, Peak or RMS mode.
- Fine tuned many things.
- Latency is now set to 2 ms. That allows the Attack to be working at 0 ms which is nice.
- New knobs with higher res and sharper look.
Inerthia Compressor changes since v1.66:
- Many optimizations to the various filters. It should now use much less CPU.
- Added a clip-meter that is quite accurate. It is ok if it flashes once or so but more then that and its clearly over the limit.
- Changed how the mix knob was routed.
- The LAH is now at 4 ms.
- Finally changed the smaller knobs.
- Fixed a bug were envelope times would change on higher sample-rates.
- Added Opto compression as an option. It is adjusted with a knob from VCA to Opto.
- Cleaned up a bunch of bugs in the sidechain part. v.1.66 sounded quite crappy but now its back to were it should be.
- Remade the graphics slightly to fit the new VCA-Opto knob. Also fixed the graphics around the peak meters.
- Moved the softclip so its placed after the sidechain listen and mono switches.
- Modified the Release times slightly. I had previously added a 100 ms to release-time when in PDR mode.
