Short answer - No. Longer one - you can map velocity to cutoff and control it this way via Velocity lane. I have a low priority task to add CC control lanes. Also, in DAW world, you can use one of the LFO tools to do this.Halonmusic wrote: ↑Sun Sep 22, 2019 4:02 pm Is it possible to control certain parameters like filter cutoff with bluearp?
BlueARP VST Arpeggiator development - let's discuss! (Apple M1 ready, 4K)
- KVRian
- Topic Starter
- 687 posts since 15 Apr, 2012 from Moscow, Russia
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
Ok thanksgraywolf2004 wrote: ↑Fri Sep 27, 2019 7:12 amShort answer - No. Longer one - you can map velocity to cutoff and control it this way via Velocity lane. I have a low priority task to add CC control lanes. Also, in DAW world, you can use one of the LFO tools to do this.Halonmusic wrote: ↑Sun Sep 22, 2019 4:02 pm Is it possible to control certain parameters like filter cutoff with bluearp?
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp
-
- KVRer
- 3 posts since 2 Apr, 2017
macOS 10.15 compatibility?=
On Logic Pro X, the old version was incompatible and ask me to trash it. the latest one is not shown on the plugin list.
Thanks for your amazing work.
On Logic Pro X, the old version was incompatible and ask me to trash it. the latest one is not shown on the plugin list.
Thanks for your amazing work.
You do not have the required permissions to view the files attached to this post.
-
- KVRer
- 11 posts since 10 Oct, 2003
Hi, this plugin looks awesome!
I'm struggling though to get it working in BitWig 3 on Linux. I downloaded the .dll and "converted" it to .so with linvst so it pops up nicely in BitWig. It's just that there seems to be no midi output from the plugin. Any other native midi-plugin I insert into the chain will indicate midi-in to the plugin and midi-out from the plugin. With BlueARP however there is no midi-output from the plugin.
I have a long time experience with Win7/Ableton, so I'm no rookie, but it bothers me that I cant get this set up correctly. Read some of the manual (pdf), but still no luck.
Any input appreciated
I'm struggling though to get it working in BitWig 3 on Linux. I downloaded the .dll and "converted" it to .so with linvst so it pops up nicely in BitWig. It's just that there seems to be no midi output from the plugin. Any other native midi-plugin I insert into the chain will indicate midi-in to the plugin and midi-out from the plugin. With BlueARP however there is no midi-output from the plugin.
I have a long time experience with Win7/Ableton, so I'm no rookie, but it bothers me that I cant get this set up correctly. Read some of the manual (pdf), but still no luck.
Any input appreciated
-
- KVRer
- 1 posts since 13 Oct, 2019
Hi, just started using this arp and it's amazing.
Is there any way to do a 6 note arpeggio? I've only been able to get it to do 5 notes.
Is there any way to do a 6 note arpeggio? I've only been able to get it to do 5 notes.
- KVRian
- 1178 posts since 25 Jan, 2017
by actually pressing 6 different keys I don't think it's possible, but ideally you could use variations of the k1-k2-k3-k4-k5 notes by displacing them up/down a varying amount of octaves/semitones from the "octave" and "scale step" lines
example: k1, k2, k3, k4, k1(+1oct), k2(+1oct), k3(+1oct), k4(+1oct)...
example: k1, k2, k3, k4, k1(+1oct), k2(+1oct), k3(+1oct), k4(+1oct)...
-
- KVRer
- 23 posts since 2 Oct, 2011
Thanks a lot!graywolf2004 wrote: ↑Sun May 12, 2019 4:34 pm No updates so far, but some good news - I started working on scalable GUI feature, since there were several requests and I realize on 4K bluearp will look too tiny.
It is a lot of reworking to do, but overall it seems to be not as bad as I expected.
I already have a dirty prototype.
I don't know how long will it take, probably 2-3 more weekends.
Bitwig, Roland TR-8S, 303, Volcas, Deepmind12, Neutron, Poly D, NI | Berlin, Germany
-
- KVRAF
- 6829 posts since 28 Apr, 2004 from france
- KVRian
- Topic Starter
- 687 posts since 15 Apr, 2012 from Moscow, Russia
I can't test it on OSX 10.15, but on my 10.11 I found an issue with auval and fixed it. Checked in Logic 10.2.4 - it successfully validates it, auval does as well.Nebula888 wrote: ↑Thu Oct 03, 2019 11:17 pm macOS 10.15 compatibility?=
On Logic Pro X, the old version was incompatible and ask me to trash it. the latest one is not shown on the plugin list.
Thanks for your amazing work.
Screen Shot 2019-10-04 at 1.24.56 AM.pngScreen Shot 2019-10-04 at 1.20.32 AM.png
Please download the same archive (I updated it) and check if it works:
http://www.graywolf2004.net/files/3/Blu ... 2.2.10.zip
(.component inside should be dated 27.10)
Last edited by graywolf2004 on Sun Oct 27, 2019 1:23 pm, edited 1 time in total.
- KVRian
- Topic Starter
- 687 posts since 15 Apr, 2012 from Moscow, Russia
Can you take freeware Kirnu and try to do the same thing? At least this way we will know if it's something wrong with bluearp or not.mais wrote: ↑Tue Oct 08, 2019 7:53 pm Hi, this plugin looks awesome!
I'm struggling though to get it working in BitWig 3 on Linux. I downloaded the .dll and "converted" it to .so with linvst so it pops up nicely in BitWig. It's just that there seems to be no midi output from the plugin. Any other native midi-plugin I insert into the chain will indicate midi-in to the plugin and midi-out from the plugin. With BlueARP however there is no midi-output from the plugin.
I have a long time experience with Win7/Ableton, so I'm no rookie, but it bothers me that I cant get this set up correctly. Read some of the manual (pdf), but still no luck.
Any input appreciated
- KVRian
- Topic Starter
- 687 posts since 15 Apr, 2012 from Moscow, Russia
A question for all BlueARP users:
1. Do you use Force to scale feature?
2. If the answer is Yes - do you feel like it needs more scales?
I finally took my time to learn more about scales and I think it is worth adding
modes of the major scale (Dorian, Phrygian, Lydian, etc.), cause they are pretty common.
I still have a low-priority task to add user-configurable scales, but it will take time, while adding some new scales to the factory list is pretty easy.
1. Do you use Force to scale feature?
2. If the answer is Yes - do you feel like it needs more scales?
I finally took my time to learn more about scales and I think it is worth adding
modes of the major scale (Dorian, Phrygian, Lydian, etc.), cause they are pretty common.
I still have a low-priority task to add user-configurable scales, but it will take time, while adding some new scales to the factory list is pretty easy.
- KVRian
- 1364 posts since 17 Jul, 2007 from Riversland Valhalla
About time, yes please allow also the ability to have user scales. Thanksgraywolf2004 wrote: ↑Mon Nov 11, 2019 7:34 am
2. If the answer is Yes - do you feel like it needs more scales?
I finally took my time to learn more about scales and I think it is worth adding
modes of the major scale (Dorian, Phrygian, Lydian, etc.), cause they are pretty common.
I still have a low-priority task to add user-configurable scales, but it will take time, while adding some new scales to the factory list is pretty easy.
-
- KVRer
- 3 posts since 2 Apr, 2017
OSX 10.15 issue, the plugin validate correctly but it complains about someting and want to trash the plugin.
looks something with a codesign? validating Audio Unit BlueARP.midiFX.x64 by graywolf2004:
------
validation result: successfully validated
updating properties of AU BlueARP.midiFX.x64 by graywolf2004…FAILED!
-----
thanks for the amazing work
looks something with a codesign? validating Audio Unit BlueARP.midiFX.x64 by graywolf2004:
------
validation result: successfully validated
updating properties of AU BlueARP.midiFX.x64 by graywolf2004…FAILED!
-----
thanks for the amazing work
- KVRian
- 1209 posts since 28 Jun, 2005
Wrong forum : https://support.apple.com/
- KVRian
- Topic Starter
- 687 posts since 15 Apr, 2012 from Moscow, Russia
Can you give some more details. Do you see this in auval or in Logic when you try to update plugin list?Nebula888 wrote: ↑Thu Nov 14, 2019 10:13 am OSX 10.15 issue, the plugin validate correctly but it complains about someting and want to trash the plugin.
looks something with a codesign? validating Audio Unit BlueARP.midiFX.x64 by graywolf2004:
------
validation result: successfully validated
updating properties of AU BlueARP.midiFX.x64 by graywolf2004…FAILED!
-----
thanks for the amazing work
Also check this thread, the same problem:
https://www.logicprohelp.com/forum/view ... p?t=112804
They say it's wrong permission on Logic Pro.app