Architect beta for macOS, Windows, and Linux. 0.10.5 now available
-
- KVRAF
- Topic Starter
- 2702 posts since 25 Aug, 2003 from Bournemouth, UK
Create a new track for each stereo pair, and then route each stereo pair into the new track using the track audio input routings. I can break this down into steps if you'd prefer a more complete description.
Architect, the modular MIDI toolkit, beta now available for macOS, Windows, and Linux.
-
jimsmith1000@verizon.net jimsmith1000@verizon.net https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=269864
- KVRer
- 20 posts since 2 Dec, 2011
Where's the other thread? ThanksThomasHelzle wrote: ↑Fri Jan 11, 2019 11:27 amRight now it's in beta and there aren't any examples (other than what the users built so far in this and the other thread) and only limited documentation since Colin wanted to first make sure the software is solid.Kalamata Kid wrote: ↑Fri Jan 11, 2019 2:30 am How many patches will be included it the release and will Colin add more and the users add more?
Is there a list even a partial list of patches?
How about a list of modules if that is what they are called in Architect?
But he wrote before that he has a lot of examples done already during development and I'm sure the user library will come and grow rather quickly too.
But since you describe yourself as somebody who will mostly depend on the prebuilt included stuff, I'd recommend to wait until it's fully done. Colin said he'll give ample warning before the presale runs out.
For now, download the beta/demo and see (or count ) yourself. The demo's not running out and the main limitation is, that you can save but not load your own projects. Check out the quick intro docs and see if the whole idea appeals to you at all.
Cheers,
Tom
- KVRAF
- 6312 posts since 9 Dec, 2008 from Berlin
viewtopic.php?f=141&t=517777
But it's no longer as active as it was in the beginning.
I guess most people wait to see the library content that Colin will create.
Cheers,
Tom
But it's no longer as active as it was in the beginning.
I guess most people wait to see the library content that Colin will create.
Cheers,
Tom
"Out beyond the ideas of wrongdoing and rightdoing, there is a field. I’ll meet you there." - Rumi
ScreenDream Instagram Mastodon
ScreenDream Instagram Mastodon
-
jimsmith1000@verizon.net jimsmith1000@verizon.net https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=269864
- KVRer
- 20 posts since 2 Dec, 2011
Thanks
-
jimsmith1000@verizon.net jimsmith1000@verizon.net https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=269864
- KVRer
- 20 posts since 2 Dec, 2011
Trying to get the Generative midi machine working in Cubase 10 Windows 10. Placed Architect on the rack and can see the notes playing on the different tracks, but when I click outputs on the rack only stereo and surround audio are available. How do I enable the host midi? Thanks
-
jimsmith1000@verizon.net jimsmith1000@verizon.net https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=269864
- KVRer
- 20 posts since 2 Dec, 2011
Loaded Architect as an instrument and added midi outputs set to host with different midi channels
-
- KVRAF
- Topic Starter
- 2702 posts since 25 Aug, 2003 from Bournemouth, UK
That's good. I'm experimenting with a multi-MIDI output mode for the next release (or next, but one). Not all hosts support this, but for those who do it'll make this kind of routing a little easier.
Architect, the modular MIDI toolkit, beta now available for macOS, Windows, and Linux.
-
jimsmith1000@verizon.net jimsmith1000@verizon.net https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=269864
- KVRer
- 20 posts since 2 Dec, 2011
How do you trigger a sequencer on the timeline?
-
- KVRAF
- Topic Starter
- 2702 posts since 25 Aug, 2003 from Bournemouth, UK
Just to clarify, do you mean as in arranging a sequencer pattern to play on the Timeline?jimsmith1000@verizon.net wrote: ↑Sun Aug 04, 2019 6:20 pm How do you trigger a sequencer on the timeline?
Architect, the modular MIDI toolkit, beta now available for macOS, Windows, and Linux.
-
jimsmith1000@verizon.net jimsmith1000@verizon.net https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=269864
- KVRer
- 20 posts since 2 Dec, 2011
Yes, added a sequencer...is another action required?colin@loomer wrote: ↑Sun Aug 04, 2019 8:02 pmJust to clarify, do you mean as in arranging a sequencer pattern to play on the Timeline?jimsmith1000@verizon.net wrote: ↑Sun Aug 04, 2019 6:20 pm How do you trigger a sequencer on the timeline?
-
jimsmith1000@verizon.net jimsmith1000@verizon.net https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=269864
- KVRer
- 20 posts since 2 Dec, 2011
How does one increase the travel on the arpeggiator?
-
- KVRAF
- Topic Starter
- 2702 posts since 25 Aug, 2003 from Bournemouth, UK
Because sequencers can simultaneously be on the Timeline and Play panels, as well as have pattern data sent to their inlets, you need to specify which thing currently is being used to control it, which you do with the Transport > Conduct property. In your case, set it to "Timeline."jimsmith1000@verizon.net wrote: ↑ Yes, added a sequencer...is another action required?
(Note that creating a sequencer directly on the Timeline will automatically set the conduct.)
Architect, the modular MIDI toolkit, beta now available for macOS, Windows, and Linux.
-
- KVRAF
- Topic Starter
- 2702 posts since 25 Aug, 2003 from Bournemouth, UK
Travel as in number of steps? If so, set the Transport > Steps property.jimsmith1000@verizon.net wrote: ↑Sun Aug 04, 2019 9:00 pm How does one increase the travel on the arpeggiator?
Travel as in note range? If so, set the Note > Range property, which is by default +/-1 octave, but can go up to +/- 4 octaves.
Architect, the modular MIDI toolkit, beta now available for macOS, Windows, and Linux.
-
jimsmith1000@verizon.net jimsmith1000@verizon.net https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=269864
- KVRer
- 20 posts since 2 Dec, 2011
Travel as in number of steps? If so, set the Transport > Steps property.colin@loomer wrote: ↑Mon Aug 05, 2019 8:49 am [quote=jimsmith1000@<span class="skimlinks-unlinked">verizon.net</span> post_id=7481773 time=1564952431 user_id=269864]
How does one increase the travel on the arpeggiator?
Travel as in note range? If so, set the Note > Range property, which is by default +/-1 octave, but can go up to +/- 4 octaves.
[/quote]
I have an arpeggiator following a sequencer. Opening the grid it recycles after about 3 quavers no matter what the other settings are. When I place a marker the pattern transposes. What is the significance of the arrows below the cells?icolin@loomer wrote: ↑Mon Aug 05, 2019 8:49 amTravel as in number of steps? If so, set the Transport > Steps property.jimsmith1000@verizon.net wrote: ↑Sun Aug 04, 2019 9:00 pm How does one increase the travel on the arpeggiator?
Travel as in note range? If so, set the Note > Range property, which is by default +/-1 octave, but can go up to +/- 4 octaves.
-
jimsmith1000@verizon.net jimsmith1000@verizon.net https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=269864
- KVRer
- 20 posts since 2 Dec, 2011
Is there a way to have a sequencer just modulate one step of another sequencer?