ok, ok your bump has been heard You can use the spacebar to toggle tablet on / off, and that will affect both pen and mouse. So far I have found no way of freeing the mouse without freeing the pen. I won't rule it out completely though, I'll ask wacom how to do it - they seem to be good in the support departmentImprov wrote:Bump!Improv wrote:ohm wrote:good news - problem was not as bad as I thought. Should be fixed now, tested in the Live, Bidule, FL, Cubase demos.
Tip of the day:
You can now purchase Tablet 2 MIDI in the LiveLab.dk shop.
Lots of changes recently - get it while it's hot (and cheap at a friendly introduction price).
Read about the new stuff here.
Does your Wacom tablet support now include the ability to use the Wacom Grafire4 mouse (as well as the pen) instead of needing a seperate mouse (something which I am NOT interested in doing for one program only). I had previously mentioned to you that a hot key 'breakout' might be useful.
Cheers
Tablet 2 MIDI - Bugs thread
-
- KVRAF
- Topic Starter
- 1511 posts since 2 Jul, 2004
http://www.livelab.dk - slice up your life
-
- KVRist
- 270 posts since 15 Jun, 2004 from Munic
I know this is a bit out of this, but:
what about using a Pocket PC for This?
It has a big touchscreen with a good display behind, It's nice and small, could operate using Bluetooth, IrDa or Wlan.
what about using a Pocket PC for This?
It has a big touchscreen with a good display behind, It's nice and small, could operate using Bluetooth, IrDa or Wlan.
-
- KVRAF
- Topic Starter
- 1511 posts since 2 Jul, 2004
yeah, I thought of this too. My pda is an old palm100, so no nice big screen and definately no Wlan. But when I get a new one, I'll cook something up, count on thatJustJ wrote:I know this is a bit out of this, but:
what about using a Pocket PC for This?
It has a big touchscreen with a good display behind, It's nice and small, could operate using Bluetooth, IrDa or Wlan.
Actually, I find it hard to beleive this is not already possible. But then again, I felt the same way about using a touchpad as a midi device.
http://www.livelab.dk - slice up your life
-
- KVRAF
- 1949 posts since 21 Mar, 2003 from Labrador
That's what bumps are for.ohm wrote: ok, ok your bump has been heard
I looked at the brief set of docs but didn't see any mention of the spacebar toggle. That seems to do the job, don't know why anything more is needed. Is it?You can use the spacebar to toggle tablet on / off, and that will affect both pen and mouse.
So far I have found no way of freeing the mouse without freeing the pen. I won't rule it out completely though, I'll ask wacom how to do it - they seem to be good in the support department
-
- KVRAF
- Topic Starter
- 1511 posts since 2 Jul, 2004
well, if that works for you it's fine, I just had an idea it might be possible to do this automatically when the mouse entered / left the tablet surface.That seems to do the job, don't know why anything more is needed. Is it?
http://www.livelab.dk - slice up your life
-
- KVRAF
- 1949 posts since 21 Mar, 2003 from Labrador
Ah, ok. Sure, that's useful. Please do.ohm wrote:well, if that works for you it's fine, I just had an idea it might be possible to do this automatically when the mouse entered / left the tablet surface.That seems to do the job, don't know why anything more is needed. Is it?
BTW-are there any templates for T2M to illustrate some possible uses? I thought I saw some on your site a while ago, but can't see any now? Hmmm...
-
- KVRAF
- Topic Starter
- 1511 posts since 2 Jul, 2004
there will be. I just received Proems template for fruity loops - he's doing one for Ableton Live too The templates include default project files for those hosts. I'm planning on a generic Energy XT template too.
There'll be a user library section on the website too so we can all share our setups.
There'll be a user library section on the website too so we can all share our setups.
http://www.livelab.dk - slice up your life
-
- KVRAF
- 1949 posts since 21 Mar, 2003 from Labrador
exT would be great. I also own T2, Podium, and SX2.2. The library is a good idea so people thinking of buying can get a better idea when road testing.ohm wrote:there will be. I just received Proems template for fruity loops - he's doing one for Ableton Live too The templates include default project files for those hosts. I'm planning on a generic Energy XT template too.
There'll be a user library section on the website too so we can all share our setups.
-
- KVRist
- 439 posts since 27 Jan, 2004 from France
Hi,
The 0.92 version shows a very slow refresh rate, both for sending messages and updating graphics, when two objects are on top of each other.
There was no problem for me with old beta versions.
As an example : http://mediasonie.free.fr/temp/zones1.t2m
The 0.92 version shows a very slow refresh rate, both for sending messages and updating graphics, when two objects are on top of each other.
There was no problem for me with old beta versions.
As an example : http://mediasonie.free.fr/temp/zones1.t2m
-
- KVRAF
- Topic Starter
- 1511 posts since 2 Jul, 2004
do you remember what beta version you used last? I you still have the exe could you please send it to me? One thing I added was transparency on the controllers - on some systems this will be slow. I'll add a switch to disable that feature.acousmod wrote:Hi,
The 0.92 version shows a very slow refresh rate, both for sending messages and updating graphics, when two objects are on top of each other.
There was no problem for me with old beta versions.
As an example : http://mediasonie.free.fr/temp/zones1.t2m
I also raised the refresh rate, this could give high cpu usage and this could lead to very slow refresh rates if the CPU is nearing 100%. Could that be the problem?
http://www.livelab.dk - slice up your life
-
- KVRist
- 439 posts since 27 Jan, 2004 from France
Sorry, I have replaced the beta with the new versiondo you remember what beta version you used last? I you still have the exe could you please send it to me?
I suppose that it was 0.7x because I was away during two weeks...
So I have no proove of the difference, but I remember well to have try to play with pads and freehand objects that overlap and there was no color trails like now.
The color trails are drawn during movements and only erase when the movement stop or the pen goes out of the overlapping area. The MIDI values are sent at this time and no one are sent during the movement.
http://mediasonie.free.fr/temp/tabdraw.jpg
Can you reproduce this ?
Or perhaps is it due to my config ?
I don't know... But my P4 HT 3,2 GHz goes nearly to 100 % when I play on two Pads at once, which is really too much !!!I also raised the refresh rate, this could give high cpu usage and this could lead to very slow refresh rates if the CPU is nearing 100%. Could that be the problem?
-
- KVRAF
- Topic Starter
- 1511 posts since 2 Jul, 2004
Has to be the transparency then. I'll add a switch to disable it. It's very different how graphics cards handle that stuff.
http://www.livelab.dk - slice up your life
-
- KVRAF
- 1579 posts since 14 Oct, 2002
Hi!
i report tablety layout printing issues...
..i went throu the printer calibration process...
..but the layout print is like 1 cm larger and like 5 mm thinner of the actual screen layout...
my tablet is a wacom graphire A6..my printer is epson stylus c66
thanx
lalo
i report tablety layout printing issues...
..i went throu the printer calibration process...
..but the layout print is like 1 cm larger and like 5 mm thinner of the actual screen layout...
my tablet is a wacom graphire A6..my printer is epson stylus c66
thanx
lalo
-
- KVRist
- 39 posts since 6 Aug, 2002 from Budapest, Hungary
-
- KVRAF
- Topic Starter
- 1511 posts since 2 Jul, 2004
update available:
* GUI performance improvements - at least twice as fast
* Fixed a bug in printer calibration
* Ability to disable controller transparency (to cut CPU / fix performance issues with some graphics cards)
emx: i coudln't reproduce the bug you mention - please try again with the latest version.
* GUI performance improvements - at least twice as fast
* Fixed a bug in printer calibration
* Ability to disable controller transparency (to cut CPU / fix performance issues with some graphics cards)
emx: i coudln't reproduce the bug you mention - please try again with the latest version.
http://www.livelab.dk - slice up your life