MuLib : MuLab & MUX Modular Community Library

[Scrubbing Monkeys]

If I share a wavetable synth with custom wavetables do I have to include the WT in a seperate file or is it embedded in the mux preset

[sl23]

Due to the new Tab functions, I upgraded my MC-909 clone to four Tones. I also resolved an issue with the source buttons not working correctly.

Each Tone can have either standard OSC, an MFO, or a Sample Player as it's sound source, or you can use all three!
Click on the Pad Buttons named after each source that appear in the OSC section on each Tab to switch source.

Here's a pic and a link to download it:

MC-909 v4.0.png

MC-909 v4.0.zip

Basically, there's a set of TAB buttons in the top left to select a Tone number or the FX tab. There's also a Step Sequencer button to open it. A simple sequence and patch are included, so load up and play a note.

The two LFO's are quite straightforward, as is most of the interface, but on the LFO's you'll find four PAD Buttons. These are used to select a destination for the LFO.

I've tried to include FX into it, hope they're ok!

Enjoy...

Thanks Jo, for all your hard work!

[robert_p]

I love the tabs! Can't wait to see them in MuLab Plugin

P.S. Your MC-909 looks quite interesting.

[sl23]

PS. Thanks

[pljones]

Could you organise the tab buttons so they're more over the tab display area, rather than remote from it. It should be more obvious then what they're controlling. Something like (if you see what I mean):

Code: Select all

[ ] FX | [ ] Seq
---
[ ]    | [ ]    | [ ]    | [ ]
Tone 1 | Tone 2 | Tone 3 | Tone 4

[sl23]

I thought the colour coding gave it away?
Only issue I have with that is that the buttons take up more room, but yes, I see what you mean!
I'll have a think about reorganising the top layout.

[pljones]

And does the

Code: Select all

[ ] FX

button enable the FX panel?  Maybe the button could sit in the panel?

[sl23]

There's two buttons for each TAB in the upper left of the front panel.
The smaller button is the power switch to enable/disable that Tone, all FX and the Step Sequencer. These are for quickly switching Tones or FX on/off.
The larger one is to switch tabs, or in the case of the Step Seq, to open it.
TAB buttons can't sit in the panel. It deletes the entire content of the Tab, apparently it's a bug that has been reported.

[robert_p]

Hi, I attached the XY Dual Filter (serial configuration, 4xLP, 1xHP, Level and Mix control)
---

XY Dual Filter.jpg

XY Dual Filter.zip

[robert_p]

Hi, updated channel strip for MuLab 9.2.8+ (CEL + ECL)
---

Mu-Channel.jpg

Channel Strips.zip

[urvieh]

Here are four presets for the Note-Mapper. It can be helpful for anyone who likes to play with just one finger

Notemapper.png

[FSM77]

Here's the chorus module from my Juno 106 Tribute Mux. I researched the Juno series chorus to approximate the cyclic tone of the circuitry.

80'S Chorus.jpg

https://drive.google.com/file/d/1QoMhpx ... drive_link

Enjoy.

FSM77

[Scrubbing Monkeys]

Hi, updated channel strip for MuLab 9.2.8+ (CEL + ECL)
---
Mu-Channel.jpg
Channel Strips.zip

You have a gift for aesthetic.

[Jonathan Shepherd]

2023-08-27 09_42_23-Greenshot.png

Hi. So this is a 32 track "traditional" set-up, with all tracks connected to the racks. In the project modular area I connected a second composer to control the first one's note action map. I edited the midi sequences to only show the key names, no piano roll. Also included is the color scheme.
Hope someone gets something out of it. Let me know if I got something wrong. Be seeing you---

32 Track template.7z

[FSM77]

Hi. Here's a new M9 Mux. It's a console channel strip from me...
https://drive.google.com/file/d/1234mMj ... drive_link