Instrument to effect. Dry wet adjust.
-
- KVRist
- Topic Starter
- 493 posts since 14 May, 2006 from toronto canada
How to adjust the dry wet signal from an instrument to an effect in a rack when the effect plugin has no wet dry adjust? There is already the pre and post selection in the racks but I have no idea how to make adjustment how much signal is dry or wet. Thankyou.
- KVRAF
- 2719 posts since 28 Mar, 2008 from a Galaxy S7 far far away
Create a mux with the audio balance module 1 to 2 so one output goes to dry other goes to wet
- KVRAF
- 12752 posts since 24 Jun, 2008 from Europe
Attached is a MUX preset that does the job.
It uses a Plugin Slot and an Audio Balancer.
Made a quick front panel for it.
It uses a Plugin Slot and an Audio Balancer.
Made a quick front panel for it.
You do not have the required permissions to view the files attached to this post.
- KVRist
- 164 posts since 9 Feb, 2016
I only use one method: I put the effect in a different rack (top slot), then I send the chosen instrument racks signal to the effect rack using a pre fader point above an empty slot which you can right click on to make it a send for the chosen effect rack.
Does that make sense? I can demonstrate on a video if need be.
Does that make sense? I can demonstrate on a video if need be.
Aka Midland Synthetics
-
- KVRist
- Topic Starter
- 493 posts since 14 May, 2006 from toronto canada
FSM77 wrote: ↑Thu Apr 11, 2024 7:52 am I only use one method: I put the effect in a different rack (top slot), then I send the chosen instrument racks signal to the effect rack using a pre fader point above an empty slot which you can right click on to make it a send for the chosen effect rack.
Does that make sense? I can demonstrate on a video if need be.
Thanks. Yes a vid would be helpful. I will try this and see whether I can figure it out. Thanks.
-
- KVRist
- Topic Starter
- 493 posts since 14 May, 2006 from toronto canada
- KVRAF
- 12752 posts since 24 Jun, 2008 from Europe
You can simply drag-drop the .Mux preset file on, for example, an empty rack slot.
Then open its front panel and there you can insert the plugin-without-wet-dry, and you can use the wet-dry knob in the MUX front panel. I recommend also having a look in the modular area of that MUX so you see how it works. That way you get familiar with all flexibility of MUX Modular.
Then open its front panel and there you can insert the plugin-without-wet-dry, and you can use the wet-dry knob in the MUX front panel. I recommend also having a look in the modular area of that MUX so you see how it works. That way you get familiar with all flexibility of MUX Modular.
-
- KVRist
- Topic Starter
- 493 posts since 14 May, 2006 from toronto canada
So is tried this within the modular area with the instrument going to the audio balancer and that going to the effect in another rack and another out going to the direct audio out. But not luck, Knob for the gain 2 does nothing. So still stuck. There must be or should be an easier way.
-
- KVRAF
- 5097 posts since 30 May, 2006 from Hollow Earth
Try again FSM77 method. Use the "Send to..." module in the Instrument Rack after your instrument.lucknow13 wrote: ↑Thu Apr 11, 2024 5:49 pm So is tried this within the modular area with the instrument going to the audio balancer and that going to the effect in another rack and another out going to the direct audio out. But not luck, Knob for the gain 2 does nothing. So still stuck. There must be or should be an easier way.
When you open the Modular Area you will see that the Instrument Rack has an additional Audio Output (added when you inserted the "Send To... module) that you need to connect to a Rack (you create) with the Effect you want to use.
MuLab of course
-
- KVRist
- Topic Starter
- 493 posts since 14 May, 2006 from toronto canada
I sent the instrument out to master and to effect rack
with the audio gain plugin in first slot with the effect just after and that seems to work.
with the audio gain plugin in first slot with the effect just after and that seems to work.
- KVRAF
- 12752 posts since 24 Jun, 2008 from Europe
The preset i shared is made with M9.5.29.
You're probably using the last official version M9.4.12.
So the MUX preset i shared is too new for M9.4.12. (my mistake)
So once you have upgraded to M9.5, which will be officially released soon, that preset will load fine.
You can already upgrade to the M9.5 beta via https://www.mutools.com/mulab/app/lates ... /beta.html
- KVRist
- 164 posts since 9 Feb, 2016
Here's a video to demonstrate how I insert an effect...
https://www.youtube.com/watch?v=pBQaJKyQKA0
https://www.youtube.com/watch?v=pBQaJKyQKA0
Aka Midland Synthetics