Double-tracking with ReValver HPse
-
- KVRer
- Topic Starter
- 5 posts since 21 Jul, 2015
Hi, sorry for reposting my message here.
I try double-tracking by following the tutorial video "Double-tracking and tone crafting with ReValver HPse".
When I have to choose the "Shreddage presets" in the Revalver HPSE, the choice does not exist. So I did not have Thick riff, Power Metal and other choice, there are none, it's empty.
How should I do it? I have not found the Peavey ReValver HPSE in my ShreddageII. So I downloaded the x64 ReValver HPSE separately.
I use Kontakt5. My Kontakt' Revalver presets directory is empty. Should I put a nki file or would I install revalver otherwise?
Thanks for your help.
Taly.
I try double-tracking by following the tutorial video "Double-tracking and tone crafting with ReValver HPse".
When I have to choose the "Shreddage presets" in the Revalver HPSE, the choice does not exist. So I did not have Thick riff, Power Metal and other choice, there are none, it's empty.
How should I do it? I have not found the Peavey ReValver HPSE in my ShreddageII. So I downloaded the x64 ReValver HPSE separately.
I use Kontakt5. My Kontakt' Revalver presets directory is empty. Should I put a nki file or would I install revalver otherwise?
Thanks for your help.
Taly.
- KVRAF
- 3303 posts since 6 Jul, 2012 from Sick-cily
Hi Taly, I'll try to explain what understand (Excuse, I'm italian, english not my first\native language)... The "Double-tracking" techniques could be various but the simplest way is:
- You have a mono file (power Metal riff? Ok!) ...
- You must duplicate this mono file, now You have 2 same (mono) files into 2 different mono tracks\channel... Ok?
- Now You panning these 2 mono file= Left and Right... At your pleasure (usually between +&- 75\100% Left & Right) ...
- Now You must create a stereo BUS (I don't know what's your DAW) and send\route these 2 (hard panned) mono channels into the stereo BUS...
- Put a little delay (10\40 ms) in one of the 2 tracks or... Download this (http://www.vescofx.com/vfxFreeHaas) and put it on the stereo BUS and try the presets...
Now Your Metal Guitars are Mastodontic (but they can loose something on the mono merge)..!
Hope I'm helpful and again, forgive my crappy english!
- You have a mono file (power Metal riff? Ok!) ...
- You must duplicate this mono file, now You have 2 same (mono) files into 2 different mono tracks\channel... Ok?
- Now You panning these 2 mono file= Left and Right... At your pleasure (usually between +&- 75\100% Left & Right) ...
- Now You must create a stereo BUS (I don't know what's your DAW) and send\route these 2 (hard panned) mono channels into the stereo BUS...
- Put a little delay (10\40 ms) in one of the 2 tracks or... Download this (http://www.vescofx.com/vfxFreeHaas) and put it on the stereo BUS and try the presets...
Now Your Metal Guitars are Mastodontic (but they can loose something on the mono merge)..!
Hope I'm helpful and again, forgive my crappy english!
-
- KVRist
- 108 posts since 25 Nov, 2003
Try going to the Impact Soundworks sub forum here at Kvr.....
http://www.kvraudio.com/forum/viewtopic ... 6&t=373264
Wayne
http://www.kvraudio.com/forum/viewtopic ... 6&t=373264
Wayne
I'm a leaf on the wind, watch me soar.......
Wash
Wash
-
- KVRer
- Topic Starter
- 5 posts since 21 Jul, 2015
I apologize for my English too.
Turello>
Thank you for these very informative pipes that I will read very carefully.
But what do you mean by creating a BUS, I use FL Studio.
Bigwaynes56>
Thank you for that very informative link.
Also, most what I wanted to know is the use of Peavey Revalver HPSE with ShreddageII, which is supposed to be included in Shreddage II that I bought, just to have a good metal guitar sound like in the tutorial :
https://www.youtube.com/watch?v=03fbxV8X-As
When I get to the step where I must choose "Shreddage presets" from the Peavey Revalver HPSE, there is nothing, no choice present. Perhaps the Peavey must be installed in a specific directory?
This is really the kind of sound I have to use.
Thank you for your help, I appreciate.
Taly
Turello>
Thank you for these very informative pipes that I will read very carefully.
But what do you mean by creating a BUS, I use FL Studio.
Bigwaynes56>
Thank you for that very informative link.
Also, most what I wanted to know is the use of Peavey Revalver HPSE with ShreddageII, which is supposed to be included in Shreddage II that I bought, just to have a good metal guitar sound like in the tutorial :
https://www.youtube.com/watch?v=03fbxV8X-As
When I get to the step where I must choose "Shreddage presets" from the Peavey Revalver HPSE, there is nothing, no choice present. Perhaps the Peavey must be installed in a specific directory?
This is really the kind of sound I have to use.
Thank you for your help, I appreciate.
Taly