I saw a used Wylde Audio The 24.625” (625.5mm) scale NOMAD for sale, at a very good price, and had to nab it. I’ve been curious about Zakk’s guitars for some time, and I liked the NOMAD’s body shape. And so, here goes.
Made in South Korea, with the RedRum color combination, the body is made of Mahogany with a quilted maple and Vortex top. The top is flat with a beveled edge, and a set-neck design. The back of the guitar sports a red/black maple flame, together with a headstock stinger. It has satin black hardware, although I changed out the knobs for more of a custom look, with a TonePros LPM04 bridge set and Grover Rotomatic 18:1 tuners. I also added the Virtual Jeff Pro whammy bridge, which I demo in the video and reviewed independently.
https://www.youtube.com/watch?v=2wgrBazhuyY
The Zakk ‘C’ neck is a maple 3-piece with Mother-of-Pearl Runes for inlays, an ebony fretboard, a 2-way adjustable truss rod, and a GraphTech XL Ivory Tusq nut (width 1.693” or 43mm). Neck thickness is .83” (21.08mm) at the first fret and .96” (24.4mm) at the twelfth fret. Fretboard Radius is 14” (355mm), and with 22 X-Jumbo frets.
Electronics include EMG 81 and 85 pickups, with a Volume control for each pickup, a Tone knob and a 3-way pickup switch selector. No noise when selecting pickups or turning the knobs. The guitar also comes with Ernie Ball Regular Slinky #2221 (.010-.046) strings, and I presume they are on the guitar, and likely not swapped out, due to it being in such good shape and hardly played.
The overall finish and quality of the guitar is excellent, with no rough edges, fret burs, etc. There are no dead spots on the neck and the action is comfortably low. Even with this baseball neck (designed for Zakk’s big hands), it very comfortable and smooth to play. I prefer thinner necks, yet I do not mind the Zakk ‘C’ neck at all. A fast legato player may feel differently. It sounds as it should with traditional EMG active pickups, sounding bold and well-defined, but not excessively hot. Each pickup selection is clear (neither muddy nor shrill), and I like that you can blend the two (since each has a separate volume control).
Are there any negatives to this guitar, minus the thick neck that some may not like? First, it’s not a light guitar, at the 8-pound mark, but certainly not as heavy as some. It has 22-frets, and I realize some like that 2-octave range. The frets are nickel, whereas most guitars in its price range (approx. $1200 USD) have stainless steel frets (although Zakk may have a preference for nickel). Likewise, at this price point, I’m surprised it does not have locking tuners, and that should be addressed.
Overall, this is an excellent guitar build-wise, and it plays well and sounds good. The biggest criticism is how many guitars, at that price point, are as good or may have some extras, like stainless steel frets or locking tuners… or a preferred neck thickness. I also would have preferred a battery compartment for quick and easy change, as opposed to removing seven screws to gain access. Lastly, and as much as I don’t mind the silky feel of the thick neck, Wylde Audio should offer a thinner neck style option for his guitars. Then again, it’s his guitars and how he likes them.
Wylde Audio NOMAD guitar (demo/review)
A forum for discussion of all things guitar!
Moderator: KVR Moderators (Main)
Wylde Audio NOMAD guitar (demo/review)
2023-11-02T13:17:15+00:00
I saw a used Wylde Audio The 24.625” (625.5mm) scale NOMAD for sale, at a very good price, and had to nab it. I’ve been curious about Zakk’s guitars for some time, and I liked the NOMAD’s body shape. And so, here goes.
Made in South Korea, with the RedRum color combination, the body is made of Mahogany with a quilted maple and Vortex top. The top is flat with a beveled edge, and a set-neck design. The back of the guitar sports a red/black maple flame, together with a headstock stinger. It has satin black hardware, although I changed out the knobs for more of a custom look, with a TonePros LPM04 bridge set and Grover Rotomatic 18:1 tuners. I also added the Virtual Jeff Pro whammy bridge, which I demo in the video and reviewed independently.
https://www.youtube.com/watch?v=2wgrBazhuyY
The Zakk ‘C’ neck is a maple 3-piece with Mother-of-Pearl Runes for inlays, an ebony fretboard, a 2-way adjustable truss rod, and a GraphTech XL Ivory Tusq nut (width 1.693” or 43mm). Neck thickness is .83” (21.08mm) at the first fret and .96” (24.4mm) at the twelfth fret. Fretboard Radius is 14” (355mm), and with 22 X-Jumbo frets.
Electronics include EMG 81 and 85 pickups, with a Volume control for each pickup, a Tone knob and a 3-way pickup switch selector. No noise when selecting pickups or turning the knobs. The guitar also comes with Ernie Ball Regular Slinky #2221 (.010-.046) strings, and I presume they are on the guitar, and likely not swapped out, due to it being in such good shape and hardly played.
The overall finish and quality of the guitar is excellent, with no rough edges, fret burs, etc. There are no dead spots on the neck and the action is comfortably low. Even with this baseball neck (designed for Zakk’s big hands), it very comfortable and smooth to play. I prefer thinner necks, yet I do not mind the Zakk ‘C’ neck at all. A fast legato player may feel differently. It sounds as it should with traditional EMG active pickups, sounding bold and well-defined, but not excessively hot. Each pickup selection is clear (neither muddy nor shrill), and I like that you can blend the two (since each has a separate volume control).
Are there any negatives to this guitar, minus the thick neck that some may not like? First, it’s not a light guitar, at the 8-pound mark, but certainly not as heavy as some. It has 22-frets, and I realize some like that 2-octave range. The frets are nickel, whereas most guitars in its price range (approx. $1200 USD) have stainless steel frets (although Zakk may have a preference for nickel). Likewise, at this price point, I’m surprised it does not have locking tuners, and that should be addressed.
Overall, this is an excellent guitar build-wise, and it plays well and sounds good. The biggest criticism is how many guitars, at that price point, are as good or may have some extras, like stainless steel frets or locking tuners… or a preferred neck thickness. I also would have preferred a battery compartment for quick and easy change, as opposed to removing seven screws to gain access. Lastly, and as much as I don’t mind the silky feel of the thick neck, Wylde Audio should offer a thinner neck style option for his guitars. Then again, it’s his guitars and how he likes them.
CoolGuitarGear
https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=478912
-
CoolGuitarGear CoolGuitarGear https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=478912
- KVRist
- Topic Starter
- 180 posts since 15 Nov, 2020
Post by CoolGuitarGear » Thu Nov 02, 2023 1:17 pm
Post Reply
1 post
• Page 1 of 1
Jump to
- The Main Forums
- ↳ KVR Studio Manager
- ↳ KVR Experts
- ↳ Getting Started (AKA What is the best...?)
- ↳ Instruments
- ↳ Effects
- ↳ Hosts & Applications (Sequencers, DAWs, Audio Editors, etc.)
- ↳ Guitars
- ↳ Mobile Apps and Hardware
- ↳ Soundware
- ↳ Samplers, Sampling & Sample Libraries
- ↳ Hardware (Instruments and Effects)
- ↳ Modular Synthesis
- ↳ Sound Design
- ↳ Production Techniques
- ↳ Music Theory
- ↳ Computer Setup and System Configuration
- ↳ DSP and Plugin Development
- ↳ DIY: Build it and they will come
- ↳ Music Cafe
- ↳ Sell & Buy (+Special Offers, Deals & Promos)
- ↳ KVR Developer Challenge 2023
- ↳ Everything Else (Music related)
- ↳ Off Topic
- ↳ Off Topic Classics
- Official Company Forums
- ↳ 2getheraudio
- ↳ accSone
- ↳ Acon Digital
- ↳ AcousticsampleS
- ↳ AcousModules
- ↳ Agitated State
- ↳ AIR Music Technology
- ↳ AMG
- ↳ Ample Sound
- ↳ Antares Audio Technologies
- ↳ Apisonic Labs
- ↳ apulSoft
- ↳ AriesCode
- ↳ Arts Acoustic
- ↳ Arturia
- ↳ Audjoo
- ↳ AudioSpillage
- ↳ Audiority
- ↳ Best Service
- ↳ Big Tick
- ↳ Bitwig
- ↳ Controller Scripting
- ↳ Blue Cat Audio
- ↳ Cherry Audio
- ↳ CWITEC
- ↳ Embertone
- ↳ energyXT
- ↳ Eventide
- ↳ Expert Sleepers
- ↳ forward audio
- ↳ Future Audio Workshop
- ↳ FXpansion
- ↳ g200kg
- ↳ Harrison Mixbus
- ↳ HG Fortune
- ↳ Homegrown Sounds
- ↳ HoRNet Plugins
- ↳ Ilya Efimov Production
- ↳ Image Line
- ↳ Impact Soundworks
- ↳ Indiginus
- ↳ Insert Piz Here
- ↳ Ju-X
- ↳ Kirk Hunter Studios
- ↳ Kirnu
- ↳ Kong Audio
- ↳ Krotos
- ↳ Kuassa
- ↳ KV331 Audio
- ↳ LennarDigital
- ↳ Les Productions Zvon
- ↳ Liqube Audio
- ↳ Loomer
- ↳ LVC-Audio
- ↳ Maizesoft
- ↳ Manytone Music
- ↳ MeldaProduction
- ↳ Mellowmuse
- ↳ MIDIMood
- ↳ moForte
- ↳ Mozaic Beats
- ↳ mucoder
- ↳ MusicDevelopments
- ↳ Tips & Tricks
- ↳ MusicLab
- ↳ MUTOOLS
- ↳ New Sonic Arts
- ↳ NUSofting
- ↳ Oli Larkin Plugins
- ↳ Orange Tree Samples
- ↳ patchpool
- ↳ Photosounder
- ↳ PlugInGuru
- ↳ Polyverse Music
- ↳ Precisionsound
- ↳ Premier Sound Factory
- ↳ Psychic Modulation
- ↳ Realitone
- ↳ Resonance-Sound
- ↳ Reveal Sound
- ↳ Roger Linn Design
- ↳ rs-met
- ↳ S3A: Spatial Audio
- ↳ SaschArt
- ↳ Smart Electronix
- ↳ sonible
- ↳ SonicBirth
- ↳ Sonic Reality / eSoundz.com
- ↳ Soundiron
- ↳ SPC Plugins
- ↳ Sugar Bytes
- ↳ TAL Software
- ↳ Tokyo Dawn Labs
- ↳ Tracktion
- ↳ u-he
- ↳ u-he Linux support
- ↳ United Plugins
- ↳ VAZ Synths
- ↳ Virharmonic
- ↳ Wolfgang Palm
- ↳ xoxos
- ↳ XSRDO - SynthCraft
- ↳ ZynAddSubFX
- Site Stuff
- ↳ Site Stuff
- Archived Forums
- ↳ AlgoMusic
- ↳ easytoolz
- ↳ Elevayta
- ↳ Hollow Sun
- ↳ Kazrog
- ↳ LinPlug
- ↳ Muse Research and Development
- ↳ Shuriken
- ↳ SoHa Sound Design
- ↳ Soniccouture
- ↳ Topten Software
- ↳ Tweakbench
- ↳ Valhalla DSP
- ↳ CK Modules & VST
- ↳ Sennheiser AMBEO
- ↳ Muon Software
- ↳ Westgatesounds.net
- ↳ Squaredheads
- ↳ Sonigen
- ↳ CFA-Sound
- ↳ Back In Time Records
- ↳ Livelab.dk
- ↳ Skytopia
- ↳ audioD3CK
- ↳ Inspire Audio
- ↳ Krakli
- ↳ Drumdrops
- ↳ Futucraft
- ↳ OverTone DSP
- ↳ RaXnTraX
- ↳ solar3d-software
- ↳ Signaldust
- ↳ Soundemote
- KVR Forum index
- All times are UTC
- Delete cookies