Presets
-
TheGuysanIdiot TheGuysanIdiot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=213066
- KVRist
- Topic Starter
- 308 posts since 10 Aug, 2009 from United Kingdom
Hi All,
Yesterday I was messing about with reggae style music and I needed to create a fingered precision bass kind of sound.
Anyway I have done a preset called P-BASS and it sounds OK to me and will save me having to plug in my bass guitar when sketching out songs.
The zip file contains:
1) The P-BASS preset
2) A demo musession
3) An MP3 of the musession so you can here it in a simple mix.
It works best at low volumes and lower down the keyboard.
[Jo]
If you like the preset please feel free to add it to M3.x.x in the ROM Bass section.
It was created using 3.1.32 as I did it yesterday before 3.2 had been released.
http://www.mediafire.com/file/k1c2myyyrlz/P-BASS.zip
OZ
Yesterday I was messing about with reggae style music and I needed to create a fingered precision bass kind of sound.
Anyway I have done a preset called P-BASS and it sounds OK to me and will save me having to plug in my bass guitar when sketching out songs.
The zip file contains:
1) The P-BASS preset
2) A demo musession
3) An MP3 of the musession so you can here it in a simple mix.
It works best at low volumes and lower down the keyboard.
[Jo]
If you like the preset please feel free to add it to M3.x.x in the ROM Bass section.
It was created using 3.1.32 as I did it yesterday before 3.2 had been released.
http://www.mediafire.com/file/k1c2myyyrlz/P-BASS.zip
OZ
Last edited by TheGuysanIdiot on Sun Jul 11, 2010 8:24 pm, edited 1 time in total.
- KVRAF
- 12744 posts since 24 Jun, 2008 from Europe
-
TheGuysanIdiot TheGuysanIdiot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=213066
- KVRist
- Topic Starter
- 308 posts since 10 Aug, 2009 from United Kingdom
You're welcome.
OZ
OZ
- KVRian
- 1233 posts since 29 Dec, 2008 from Lithuania
-
TheGuysanIdiot TheGuysanIdiot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=213066
- KVRist
- Topic Starter
- 308 posts since 10 Aug, 2009 from United Kingdom
Of course I don't mind, I am very flattered.
Well done.
I still cannot believe how good the bass preset sounds myself.
Only goes to show how good the MU.LAB synths are.
Over the coming week I think I will work on some more presets of all kinds and upload them.
Bye for now!
OZ
Well done.
I still cannot believe how good the bass preset sounds myself.
Only goes to show how good the MU.LAB synths are.
Over the coming week I think I will work on some more presets of all kinds and upload them.
Bye for now!
OZ
-
TheGuysanIdiot TheGuysanIdiot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=213066
- KVRist
- Topic Starter
- 308 posts since 10 Aug, 2009 from United Kingdom
Hi All,
I have done a small package of 6 presets (PRESETS1).
Package contains:
1) musession demo of the preset (just any notes that came to mind not songs etc.)
2) MP3 of the demo session just to hear them
3) 6 presets
[Jo]
As usual you decide if you want to add them to M3.x.x
Just in case you do these are the ROM categories I think they fit:
Popkorn - Leads
Micro - Bass
Altar - Pads
Wow - SFX
UFO Hover - SFX
Searching - Pads
[Everyone]
I am enjoying making these presets and learning more about preset design etc.
I will work on them in small packs and post them when done. This way I can do life's other stuff and do some presets when I have a spare moment or two and not get bored doing too many at one time.
I will add the packs to this same thread when they are ready.
http://www.mediafire.com/file/3jn4hiaxeoz/PRESETS1.zip
Bye for now!
P.S done in M3.2.2
OZ
I have done a small package of 6 presets (PRESETS1).
Package contains:
1) musession demo of the preset (just any notes that came to mind not songs etc.)
2) MP3 of the demo session just to hear them
3) 6 presets
[Jo]
As usual you decide if you want to add them to M3.x.x
Just in case you do these are the ROM categories I think they fit:
Popkorn - Leads
Micro - Bass
Altar - Pads
Wow - SFX
UFO Hover - SFX
Searching - Pads
[Everyone]
I am enjoying making these presets and learning more about preset design etc.
I will work on them in small packs and post them when done. This way I can do life's other stuff and do some presets when I have a spare moment or two and not get bored doing too many at one time.
I will add the packs to this same thread when they are ready.
http://www.mediafire.com/file/3jn4hiaxeoz/PRESETS1.zip
Bye for now!
P.S done in M3.2.2
OZ
- KVRAF
- 12744 posts since 24 Jun, 2008 from Europe
Nice presets OZ!
Included in the next package. Thanks for sharing!
I only tweaked the Wow preset a bit as i found the attack time too long.
So now it's in the Bass folder
Altar really is a great pad!
Included in the next package. Thanks for sharing!
I only tweaked the Wow preset a bit as i found the attack time too long.
So now it's in the Bass folder
Altar really is a great pad!
-
TheGuysanIdiot TheGuysanIdiot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=213066
- KVRist
- Topic Starter
- 308 posts since 10 Aug, 2009 from United Kingdom
Hi Jo,
Feel free to adjust any preset you wish. I only have one pair of ears so you do the final quality control etc.
Indeed the "Altar" patch sounds something special I think it is FAB.
OZ
Feel free to adjust any preset you wish. I only have one pair of ears so you do the final quality control etc.
Indeed the "Altar" patch sounds something special I think it is FAB.
OZ
-
- KVRAF
- 2938 posts since 18 Jul, 2005
Agreed, P-bass is a great patch. I'll probably use this in a project where bass guitar doesn't fit at some point. Thanks!
- KVRian
- 1233 posts since 29 Dec, 2008 from Lithuania
-
TheGuysanIdiot TheGuysanIdiot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=213066
- KVRist
- Topic Starter
- 308 posts since 10 Aug, 2009 from United Kingdom
Hi All,
You are all welcome.
One question, how do I change the title of this thread?
OZ
You are all welcome.
One question, how do I change the title of this thread?
OZ
- KVRian
- 1233 posts since 29 Dec, 2008 from Lithuania
-
TheGuysanIdiot TheGuysanIdiot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=213066
- KVRist
- Topic Starter
- 308 posts since 10 Aug, 2009 from United Kingdom
Ta!
I changed it to "Presets" for my future preset packs etc.
OZ
I changed it to "Presets" for my future preset packs etc.
OZ
- KVRian
- 1233 posts since 29 Dec, 2008 from Lithuania
-
TheGuysanIdiot TheGuysanIdiot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=213066
- KVRist
- Topic Starter
- 308 posts since 10 Aug, 2009 from United Kingdom
Hi Jo,
While I am working on more presets I some questions about how the WFT Oscillator works from a technical point of view.
a) Is all about the relationship between "Fatness, Detune and Spread".
Please can you explain in your own words how they work with each other?
I am particularly interested in what the "Fatness" actually does as I increase its number from 0 upwards.
"0" Fatness seems to mean one saw for example.
"1" Fatness - does this mean two saws and the detune works between them?
Detune works when Fatness is above "0"
Spread seems to handle stereo width.
b) "Pitch mod." - same again, how does that actually work from a technical point of view I cannot seem to get it to do much. How should I use this?
I am now creating multi-saw style synth presets and just want to make sure I am using each WFT Oscillator as efficiently as possible.
OZ
While I am working on more presets I some questions about how the WFT Oscillator works from a technical point of view.
a) Is all about the relationship between "Fatness, Detune and Spread".
Please can you explain in your own words how they work with each other?
I am particularly interested in what the "Fatness" actually does as I increase its number from 0 upwards.
"0" Fatness seems to mean one saw for example.
"1" Fatness - does this mean two saws and the detune works between them?
Detune works when Fatness is above "0"
Spread seems to handle stereo width.
b) "Pitch mod." - same again, how does that actually work from a technical point of view I cannot seem to get it to do much. How should I use this?
I am now creating multi-saw style synth presets and just want to make sure I am using each WFT Oscillator as efficiently as possible.
OZ