One Synth Challenge #182: Charlatan 3 by BlauKraut Engineering / karrikuh (IrionDaRonin Wins!)
-
- KVRian
- 1294 posts since 9 Jan, 2013 from morf
Voted
Man is least himself when he talks in the first person. Give him a mask, and he'll show you his true face
-
- KVRist
- 255 posts since 1 Jun, 2011
I'm voting right now, but so far I find this round to be incredibly strong.
Great job, party people.
Great job, party people.
https://soundcloud.com/vospi
I love music, worked with a number of music/rhythm/dance games like Pump It Up, In The Groove, Cytus and Deemo, and teach music production.
I love music, worked with a number of music/rhythm/dance games like Pump It Up, In The Groove, Cytus and Deemo, and teach music production.
-
BrainBeatMusic BrainBeatMusic https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=561105
- KVRist
- 175 posts since 19 Apr, 2022
I think at least for me often there was a check and then you had to then try posting again for it to work.ChristopherWD wrote: ↑Wed May 15, 2024 3:59 am Also, SoundCloud seems to block my comments so much I had to check if I was still even connected to the internet... I tried again today, let's hope it sticks...
-
- KVRAF
- 2253 posts since 7 Mar, 2014
Have made my final re-jigs and hopefully commented on all tracks. If they have not appeared then please blame SC!
A very very strong round with many powerful tracks. My head is reeling after a few hours of dedicated listening this morning (to the last 10 tracks in my vote bins!).
Good luck all - hope to be placed around the pivot point as usual (say 20th?).
I had fun making this track and apologise for my flute solo being too loud for some.
See you all in the next round ...
dB
A very very strong round with many powerful tracks. My head is reeling after a few hours of dedicated listening this morning (to the last 10 tracks in my vote bins!).
Good luck all - hope to be placed around the pivot point as usual (say 20th?).
I had fun making this track and apologise for my flute solo being too loud for some.
See you all in the next round ...
dB
-
neverbeeninariot neverbeeninariot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=350084 - KVRian
- 989 posts since 3 Feb, 2015 from UK
-
Impedance Music Impedance Music https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=439982 - KVRist
- 94 posts since 27 Apr, 2019
Finished voting!
I usually take my time voting, but i have to admit this month i've had almost no time for it (mostly because i was visiting family with no internet connection), so sorry for my lack of comments - I've read and appreciate every comment i got
Regarding the vocals:
The Vocals are made with an audio to midi approach. I've created the vocals using elevenlabs AI and converted it to a MIDI file. I've slightly tweaked the MIDI file to make it more intelligable, but it was pretty much good to go. The Sound Design part is actually pretty boring:
It's a mix of Sine OSC with a slight hint of Noise - The noise makes the vocals more intelligable. For AMP EG I've used a little bit of Attack and Release, and full Sustain. I've used a LowPass and a High Pass Filter. In the FX Section the S+H Distortion does the most important job and the Phaser makes the vowels slightly more intelligable. And last but not least I've cut the high End which the Distortion adds with the EQ. In the DAW FX Section I've used Soundgoodizer (Multibandcompressor), an EQ to cut the Sub Region for Mixing and Fruity Delay 2 for well, Delay. I've attached the MIDI and the Preset to this post.
This was a really strong round! Well done everyone!
I usually take my time voting, but i have to admit this month i've had almost no time for it (mostly because i was visiting family with no internet connection), so sorry for my lack of comments - I've read and appreciate every comment i got
Regarding the vocals:
The Vocals are made with an audio to midi approach. I've created the vocals using elevenlabs AI and converted it to a MIDI file. I've slightly tweaked the MIDI file to make it more intelligable, but it was pretty much good to go. The Sound Design part is actually pretty boring:
It's a mix of Sine OSC with a slight hint of Noise - The noise makes the vocals more intelligable. For AMP EG I've used a little bit of Attack and Release, and full Sustain. I've used a LowPass and a High Pass Filter. In the FX Section the S+H Distortion does the most important job and the Phaser makes the vowels slightly more intelligable. And last but not least I've cut the high End which the Distortion adds with the EQ. In the DAW FX Section I've used Soundgoodizer (Multibandcompressor), an EQ to cut the Sub Region for Mixing and Fruity Delay 2 for well, Delay. I've attached the MIDI and the Preset to this post.
This was a really strong round! Well done everyone!
You do not have the required permissions to view the files attached to this post.
"We should not kill the earth, we wouldn´t know where to bury it!" - Michel Granger
-
- KVRist
- 114 posts since 16 Jul, 2019
Voted !
I was happy to hear a lot of EDM tracks this round, it's pretty rare that there are so many, and well I loved it. Congrats to evryone !
I was happy to hear a lot of EDM tracks this round, it's pretty rare that there are so many, and well I loved it. Congrats to evryone !
-
phankiejankie303 phankiejankie303 https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=515581 - KVRist
- 136 posts since 30 May, 2021
Voted! Great round this one. Good job all!
-
- KVRAF
- 2253 posts since 7 Mar, 2014
Which software did you use to convert the audio to MIDI? Various software comes to mind, and even simple ReaTune in Reaper can do it ...
Just wondered which way you went with this ...
dB
-
- KVRian
- 1294 posts since 9 Jan, 2013 from morf
https://www.kvraudio.com/product/neuralnote-by-dr-audio
Just a guess
I've had a bit of a try with it
Man is least himself when he talks in the first person. Give him a mask, and he'll show you his true face
-
- KVRAF
- 2253 posts since 7 Mar, 2014
What you would want really is to create a stack of midi notes tracking formants over time, basically following what a spectrogram of speech looks like, but simplifying it to perhaps F0-F3 (maybe F4).
Maybe set a filter to only pass each formant band through (within certain bandwidths) and then do a audio to midi note for each formant.
Of course, there are free tools which extract formant data (eg Praat) which might help here.
dB
Maybe set a filter to only pass each formant band through (within certain bandwidths) and then do a audio to midi note for each formant.
Of course, there are free tools which extract formant data (eg Praat) which might help here.
dB
-
Leonard Bowman Leonard Bowman https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=422028
- KVRist
- 198 posts since 4 Jul, 2018 from the nest
One option for audio to midi is https://github.com/virokannas/audio2midi which was made by another OSC'er (toggleaudio) for OSC 118
Also, i voted for this round. Didn't leave myself nearly enough time for voting so I haven't gotten around to commenting on SoundCloud yet though.
Also, i voted for this round. Didn't leave myself nearly enough time for voting so I haven't gotten around to commenting on SoundCloud yet though.
mostly here for the One Synth Challenge
you can hear some of my newest music at: https://wrenharmonic.bandcamp.com/ or https://www.youtube.com/@wrenharmonic
you can hear some of my newest music at: https://wrenharmonic.bandcamp.com/ or https://www.youtube.com/@wrenharmonic
-
- KVRian
- 992 posts since 30 Oct, 2013 from Scarborough
Voted
https://rjsemper.wixsite.com/website
One Synth Challenge - https://sites.google.com/site/kvrosc/about
One Synth Challenge - https://sites.google.com/site/kvrosc/about
-
- KVRAF
- 2253 posts since 7 Mar, 2014
Yup, plenty of audio to midi, but these really only detect the pitch and make a midi note, but what is really needed is finer granularity and to track the formants along with the F0 (aka the pitch).Leonard Bowman wrote: ↑Thu May 16, 2024 12:51 am One option for audio to midi is https://github.com/virokannas/audio2midi which was made by another OSC'er (toggleaudio) for OSC 118
dB