Bitwig

babyblue · Post by **babyblue** » Tue Dec 24, 2019 10:00 pm

thanks for your encouragement! I found it explained at
https://youtu.be/1JjNaviDS5A?t=321

and it works

babyblue · Post by **babyblue** » Wed Dec 25, 2019 1:24 pm

Hi,

i have still some questions about the different terms in flexi and what they are used for, especially:

Send 1-8 Mode

Set Item value 1-8: Change Volume of the Send X of track 1-8 in the current bank page
Other controls are the same as in track mode

which i found at https://github.com/git-moss/DrivenByMos ... eric-Flexi
What is Send 1-8 Mode?

moss · Post by **moss** » Wed Dec 25, 2019 4:46 pm

babyblue wrote: ↑Wed Dec 25, 2019 1:24 pm Hi,

i have still some questions about the different terms in flexi and what they are used for, especially:

Send 1-8 Mode

Set Item value 1-8: Change Volume of the Send X of track 1-8 in the current bank page
Other controls are the same as in track mode

which i found at https://github.com/git-moss/DrivenByMos ... eric-Flexi
What is Send 1-8 Mode?

I just created a playlist with all GenericFlexi videos:
https://www.youtube.com/watch?v=m4DkBlh ... dEDJDColcP
The first video in the list should answer your questions.

moss · Post by **moss** » Wed Dec 25, 2019 5:03 pm

Amuq wrote: ↑Tue Dec 24, 2019 12:53 pm Bug report

Push 2 - when I'm in clip mode and I'm trying to view the midi clip, I cannot change the view of the clip beyond the first beat, and it doesn't expand to include any added notes.

That's still a bit weird. This note display shows only the currently selected page of the note sequencer. So, select the note sequencer and select a different page to see the other notes.

babyblue · Post by **babyblue** » Wed Dec 25, 2019 7:26 pm

moss wrote: ↑Wed Dec 25, 2019 4:46 pm
I just created a playlist with all GenericFlexi videos:

The first video in the list should answer your questions.

Thanks for the video Jürgen,

i got an idea from your video, what Send 1-8 Mode could mean, but only a bit...
Is Send 1 Mode, where i can assign my 8 knobs, though already (successfully) assigned (Track1-8: Set Panorama etc.) to adjust S1 Effect of Track 1-8 and in Send 2 Mode adjust S2 Effect of Track 1-8 and if i press next Bank Page Sends of Track 9-16, etc.?

I have a PCR 500 so i am afraid, i cannot use all the features of flexi?
I assigned the Pad Button A1 Note Number 36 to Mode Send 1 and Pad A2 to Mode Send 2 and i can see in Mixerview, that the S1 Effect "Led" switches to S2 Effect, when i press the appropriate Button. But now? The already assigned 8 Knobs still move the Panknobs 1-8.
Which Mode or Parameter do i have to assign in Flexi to the 8 Knobs, that they can control the send amount, or am i misunderstanding the Mode?

Thanks in advance

babyblue · Post by **babyblue** » Wed Dec 25, 2019 10:04 pm

I got it working. I switched the PCR Control Map to No. 2, where i had assigned other Control Numbers to the 8 knobs than in Control Map 1.

Kung VU · Post by **Kung VU** » Sun Dec 29, 2019 11:49 pm

Hello Jürgen,
I noticed that the Push2 somehow does not display backlight on the pads (only on the active ones like Note in the picture of the attachment). That makes it difficult to identify the pads sometimes. Is this meant to be like this or do I have something wrong in my setup? I reinstalled the most recent extension version 7.6 and added the controller again with default settings but that did not help. Do you have a tip how I could fix the problem?
Regards, Uli

moss · Post by **moss** » Mon Dec 30, 2019 7:44 am

Kung VU wrote: ↑Sun Dec 29, 2019 11:49 pm Hello Jürgen,
I noticed that the Push2 somehow does not display backlight on the pads (only on the active ones like Note in the picture of the attachment). That makes it difficult to identify the pads sometimes. Is this meant to be like this or do I have something wrong in my setup? I reinstalled the most recent extension version 7.6 and added the controller again with default settings but that did not help. Do you have a tip how I could fix the problem?
Regards, Uli

Do you have the power supply connected?

moss · Post by **moss** » Mon Dec 30, 2019 10:21 am

I just release DrivenByMoss 8.50. This is the biggest change list ever

Requires Bitwig 3.1+.
- All devices use the new Hardware API
Removed support for Arturia Beatstep Pro due to too much limitations (use Generic Flexi instead).
AutoColor
- Fixed: Auto coloring did not work on added tracks which had the same name as the track which was before at that position.
APC40
- New: Changed direction of session-clip/scene scrolling
Mackie HUI
- New: Added support for icon Master fader extension
- New: Insert buttons select track
- New: Added (HUI QICK PUNCH) - Toggle Punch In
- New: Added (HUI IN) - Toggle Punch In
- New: Added (HUI OUT) - Toggle Punch Out
- New: Added (HUI ON LINE) - Toggle Audio Engine on/off for current project
- New: Added (HUI RETURN TO ZERO) - Return the play cursor to the start of the arranger
- New: Improved unmute/unsolo all tracks
Native Instruments Kontrol 1
- New: Improved speed of knobs
- New: Changed direction of session-clip/scene scrolling
Launchpad
- New: Added Poly Sequencer
- New: Delete + Scene button in Session view deletes the scene
- New: Shift mode: Enable note repeat and set the note repeat period and length with the pads in the middle
- New: Sends mode: Display name of sends when selected
- New: Light buttons brighter when pressed
- New: Flipped Up/Down button in Device mode
- New: Changed direction of session-clip/scene scrolling
- New: Added notification messages to Shift view
- New: Used several colors in Shift view for easier function identification
- Fixed: Duplicate did not work on non-pro models
Maschine Mikro Mk3
- You need to load the new template into the Maschine (Bitwig.ncc) first
- New: Use multiple colors on pads
- New: Added note repeat (long press note view to change settings)
- New: Pressing the encoder button always toggles between slow/fast value change, except tempo (tap tempo) and browser mode (confirm selection)
OSC
- New: The port of the OSC server ("receive on") can be configured again.
- New: Added commands for note repeat (/vkb_midi/noterepeat/...)
- New: Added /track/hasParent {0,1}
Push 1/2
- New: Added note repeat, long press Repeat button for configuration settings
- New: Added cue volume and cue mix to Master mode
- New: Delete + Track button: Delete the track
- New: Delete + Scene button (in Play, Piano, Drum 64, Session view): Delete the scene
- New: Delete + pad in scene play mode: Delete the scene
- New: Added "Clear Mute/Solo" to drum channel details
- New: The quantize mode now contains the record quantization configuration as well
- New: More parameters for note editing
- New: The note insert/edit MIDI channel can be selected in the Track Details mode and in the document settings
- New: Buttons are lit brighter when pressed
- New: Automate button is lit orange (instead of red) when Clip automation is displayed
- New: Improved unmute/unsolo all tracks
- New: Changed direction of session-clip/scene scrolling
- New: Scrolling scenes in scene play view scrolls whole 64 scenes
- New: User page names can be edited in the document settings
- Fixed: Push 1: Header text in Master mode was missing
- Fixed: Push 2: Scenes in scene mode were not immediately updated and not in sync Session Scene view.
SL MkIII
- New: Changed direction of session-clip/scene scrolling

https://youtu.be/2ZZ15Zvz2ZI
https://youtu.be/DUD1lASEzII
https://youtu.be/SkNAmTX04l8
https://youtu.be/wuxd3bSjNt0

Enjoy!

monophonK · Post by **monophonK** » Mon Dec 30, 2019 10:33 am

Cool thank you very much for you effort!

aon · Post by **aon** » Mon Dec 30, 2019 10:56 am

Many thanks for the update!

Question regarding Note Repeat, in Ableton it´s possible to quickly change the speed of the repeat using the row of button (1/32t to 1/4), that´s critical when recording drumrolls etc. The speed buttons doesn´t seem to be used in "Drum Mode" (4x4 grid) so maybe it could be implemented there?

pc999 · Post by **pc999** » Mon Dec 30, 2019 12:26 pm

WOW Thanks!!!

Just one question, can we change individual note lengths in the new launchpad polyseq?

Kung VU · Post by **Kung VU** » Mon Dec 30, 2019 1:07 pm

moss wrote: ↑Mon Dec 30, 2019 7:44 am
Kung VU wrote: ↑Sun Dec 29, 2019 11:49 pm Hello Jürgen,
I noticed that the Push2 somehow does not display backlight on the pads (only on the active ones like Note in the picture of the attachment). That makes it difficult to identify the pads sometimes. Is this meant to be like this or do I have something wrong in my setup? I reinstalled the most recent extension version 7.6 and added the controller again with default settings but that did not help. Do you have a tip how I could fix the problem?
Regards, Uli
Do you have the power supply connected?

That is a bit embarrassing now but no. LOL. OK to my defense I used to work on it on my desktop computer and that’s were I left the power supply. Thanks a lot and and I just saw you released yet another version with new features. That’s so brilliant! I looove holidays like this!

TVbene · Post by **TVbene** » Mon Dec 30, 2019 1:24 pm

moss wrote: ↑Mon Dec 30, 2019 10:21 am [*] Maschine Mikro Mk3

You need to load the new template into the Maschine (Bitwig.ncc) first

New: Use multiple colors on pads

New: Added note repeat (long press note view to change settings)

New: Pressing the encoder button always toggles between slow/fast value change, except tempo (tap tempo) and browser mode (confirm selection)

Wow - thank you! Looks fantastic!

zengel · Post by **zengel** » Mon Dec 30, 2019 6:54 pm

WOUHOU !!! name for user mode ! Thats soooo coool ! Thanks !!! Not at home now and i can't wait to play with all this new features on the Push 2 ! thanks so mutch Moss ! That's just made my gift for Christmas and new year !! Happy new year Moss ! Thanks for such a great work !

Bitwig

KVR Audio

DrivenByMoss: Bitwig extension for many hardware controllers (version 23.2.1)