Updated this with the 1.1 presets, improved graphics and full previews.aMUSEd wrote: ↑Wed Jan 02, 2019 4:36 pmTogether with a couple of fellow NI user Library members (Cooner and Christos Adamos) we have now kompleted the NKS conversion with previews and the full factory library as .nksfaMUSEd wrote: ↑Tue Dec 11, 2018 10:45 pm Here's a NKS template for using this in NI keyboards/Maschine
https://www.dropbox.com/sh/hiwrbo8jcoah ... Rz17a?dl=0
No doubt Arturia will eventually get round to doing this themselves but in the meantime I couldn't wait
Arturia 11 December - Pigments Synth
- KVRAF
- 35351 posts since 14 Sep, 2002 from In teh net
-
- KVRAF
- 7809 posts since 15 Sep, 2005 from East Coast of the USA
Speaking of nitpicking, I have one also. It's even more of a nitpick than yours, as it's just a display I'd like changed. When you turn the control for the LFO all the way to right so it is S/H, it still looks like a square wave. I know the dot that goes along moves in a more random S/H pattern, but I'd like the waveform itself to look like a S/H shape. I guess as long as I see it fully turned to the right then I know it's S/H, and if I watch for a second or two I will see that movement looking more random to confirm it, but anyway...alexishere wrote: ↑Wed Jan 16, 2019 2:49 amWhat I mean is, glide is functioning as ‘Time’ mode. No option to change to ‘Rate’ mode. In other words, the gliding sound will always be noticeable even within small intervals as opposed to noticeable only within big intervals using rate mode. .SJ_Digriz wrote: ↑Tue Jan 15, 2019 3:33 pmYou mean this?alexishere wrote: ↑Sun Jan 13, 2019 3:43 pm Here's another nickpick, No 'Rate' mode for glide.. Pretty basic stuff but it's not there.
Take for example, Diva and hive’s glide - Two modes(time and rate). Serum gives you a curve editor, even more flexible.
But like I said, it’s a nickpick
I told you it was a nitpick ...
Last edited by Examigan on Sat Jan 26, 2019 5:45 pm, edited 1 time in total.
- KVRAF
- 4983 posts since 26 Apr, 2007 from Noosphere
Arovane is here!arovane1 wrote: ↑Mon Jan 21, 2019 9:50 am a few more sound examples from my upcoming preset bank for arturia's pigments synth' https://soundcloud.com/arovane-1/arovan ... ds-part-ii
-
- KVRist
- 61 posts since 22 Sep, 2017 from germany
- KVRist
- 130 posts since 4 Jan, 2019
You do not have the required permissions to view the files attached to this post.
-
- KVRAF
- 7809 posts since 15 Sep, 2005 from East Coast of the USA
I'm not sure how much wider you'd want the stereo spread to be as it seems Ok to me , but here is some info from the manual:
Classic mode:
This is the sort of unison detune mode found in many polyphonic analog synthesizers of the
past: all of the unison voices are centered around a single note and tuned above and below
that pitch as the detuning amount is increased. Pigments offers some interesting twists to
that concept, though.
Chord mode:
With the Unison Chord feature the pitch of the unison voice will be quantized in semitones
to match one of 12 classic chord shapes. The greater the number of unison voices used, the
richer the chord will be.
Also, if you use the same type for both engines at once it can seem much thicker. 8 voice unison on both wavetable engines for instance.
Classic mode:
This is the sort of unison detune mode found in many polyphonic analog synthesizers of the
past: all of the unison voices are centered around a single note and tuned above and below
that pitch as the detuning amount is increased. Pigments offers some interesting twists to
that concept, though.
Chord mode:
With the Unison Chord feature the pitch of the unison voice will be quantized in semitones
to match one of 12 classic chord shapes. The greater the number of unison voices used, the
richer the chord will be.
Also, if you use the same type for both engines at once it can seem much thicker. 8 voice unison on both wavetable engines for instance.
- KVRAF
- 4983 posts since 26 Apr, 2007 from Noosphere
Thank you Examigan for gettting this information. I hoped the other modes would be different. I was just listening to some demos on YT and the unison did sound thinner than, for instance, on SynthMaster or Thorn.Examigan wrote: ↑Sat Feb 16, 2019 11:36 am I'm not sure how much wider you'd want the stereo spread to be as it seems Ok to me , but here is some info from the manual:
Classic mode:
This is the sort of unison detune mode found in many polyphonic analog synthesizers of the
past: all of the unison voices are centered around a single note and tuned above and below
that pitch as the detuning amount is increased. Pigments offers some interesting twists to
that concept, though.
Chord mode:
With the Unison Chord feature the pitch of the unison voice will be quantized in semitones
to match one of 12 classic chord shapes. The greater the number of unison voices used, the
richer the chord will be.
Also, if you use the same type for both engines at once it can seem much thicker. 8 voice unison on both wavetable engines for instance.
-
- KVRAF
- 6642 posts since 14 Nov, 2006 from Ankara, Turkey
I don't know about Pigments's unison implementation but we have a) unison detune curve and b) osc tune drift which operates separately for each unison osc in SM1 / SM2
Works at KV331 Audio
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
SynthMaster voted #1 in MusicRadar's "Best Synth of 2019" poll
SynthMaster One voted #4 in MusicRadar's "Best Synth of 2019" poll
-
- KVRAF
- 7809 posts since 15 Sep, 2005 from East Coast of the USA
Almost everything can be modulated. You click the + sign in the upper-right of whichever knob and then a row of sliders appear where you can add an amount of modulation. Each of those sources also has a sidechain feature.
It has two engines and the unison is only available on the wavetable engine type, but you can set both engines to WT and set the Unison (and modulation) the way you want on each of those.
In this screenshot, I clicked the + next to Unison Detune and you can see the choices for it that you can adjust with the sliders. This was a Init preset I loaded so there's nothing setup on it at the moment.
It has two engines and the unison is only available on the wavetable engine type, but you can set both engines to WT and set the Unison (and modulation) the way you want on each of those.
In this screenshot, I clicked the + next to Unison Detune and you can see the choices for it that you can adjust with the sliders. This was a Init preset I loaded so there's nothing setup on it at the moment.
You do not have the required permissions to view the files attached to this post.
- KVRist
- 130 posts since 4 Jan, 2019
01 - Arturia - Pigments - Generative Brain
02 - Arturia - Pigments - Let's Take a Walk
https://soundcloud.com/user-919732565/facing-me
02 - Arturia - Pigments - Let's Take a Walk
https://soundcloud.com/user-919732565/facing-me
You do not have the required permissions to view the files attached to this post.
- KVRAF
- 2275 posts since 4 Dec, 2011 from Brasília, Brazil
Pigments is now available on Splice Rent-to-Own (20 months of 9.99)
https://splice.com/plugins/38677978-pig ... by-arturia
https://splice.com/plugins/38677978-pig ... by-arturia
My soundcloud: https://soundcloud.com/waltercruz
- KVRist
- 130 posts since 4 Jan, 2019
01 - Arturia - Pigments
02 - Spitfire Audio - LCOT
https://soundcloud.com/user-919732565/in-my-memory
02 - Spitfire Audio - LCOT
https://soundcloud.com/user-919732565/in-my-memory
You do not have the required permissions to view the files attached to this post.
-
- KVRian
- 1226 posts since 26 Feb, 2016
Zak got some interesting drones/atmospheres with it, might have to opt in on this one:
https://www.youtube.com/watch?v=icA9I2G ... e=youtu.be
https://www.youtube.com/watch?v=icA9I2G ... e=youtu.be