Unfiltered Audio BYOME
-
- KVRian
- 1226 posts since 26 Feb, 2016
-
- KVRian
- 1204 posts since 23 May, 2016
Yes, I see it like Steve, these are very different effects. Also molekular requires Reaktor which is quite heavy. Byome really inspires me. With molekular I have to tweak longer to get what I want.
-
el-bo (formerly ebow) el-bo (formerly ebow) https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=208007
- KVRAF
- 16369 posts since 24 May, 2009 from A galaxy, far far away
That's beautifulSoarer wrote: ↑Tue Dec 04, 2018 10:08 am Here’s a BYOME demo I made.
Dry synth first, then BYOME comes in with lots of macro automation.
BYOME on the drums as well.
https://soundcloud.com/soarer-soundworks/heighten
-
- KVRian
- 625 posts since 19 Mar, 2004 from Copenhagen
-
Sampleconstruct Sampleconstruct https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=191286
- KVRAF
- 16141 posts since 12 Oct, 2008 from Here and there
-
- KVRist
- 57 posts since 22 Dec, 2012 from Germany
Found out today that the Sidechain Setting of the Input Follower Modulator is not correctly remembered on Session Load (at least for Windows and VST3 in Cubase/Nuendo).
The GUI still shows correctly (as in that it is using the Sidechain input) but it uses the direct audio input to the VST when reloading a Project. Have to manually toggle it on/off again to work
Can anyone else confirm this?
The GUI still shows correctly (as in that it is using the Sidechain input) but it uses the direct audio input to the VST when reloading a Project. Have to manually toggle it on/off again to work
Can anyone else confirm this?
- KVRAF
- 2254 posts since 16 May, 2004 from Soviet Union
Hm, did check just now, really can confirm, the same issue with VST2 sidechain after reopen project.Symetry wrote: ↑Fri Dec 07, 2018 8:38 am Found out today that the Sidechain Setting of the Input Follower Modulator is not correctly remembered on Session Load (at least for Windows and VST3 in Cubase/Nuendo).
The GUI still shows correctly (as in that it is using the Sidechain input) but it uses the direct audio input to the VST when reloading a Project. Have to manually toggle it on/off again to work
Can anyone else confirm this?
DAW Studio One 3 64bit, Win7, Byome vst2 v1.0.0
-
- KVRAF
- 11156 posts since 2 Dec, 2004 from North Wales
Hi all
Late to the party, just got BYOME- weird problem - everything fine in Cubase but in Bitwig and Studio One 4 I cant make connections with the virtual cables (but all patches work with cables when loaded)
Also Rolli lightpad module doesn't work in any DAW for me (tried Cubase, BWS, Studio One), no midi input showing up, just says 'none'.....but works perfectly in VCV Rack 'host' (even lights up UA!)
Very weird.
Late to the party, just got BYOME- weird problem - everything fine in Cubase but in Bitwig and Studio One 4 I cant make connections with the virtual cables (but all patches work with cables when loaded)
Also Rolli lightpad module doesn't work in any DAW for me (tried Cubase, BWS, Studio One), no midi input showing up, just says 'none'.....but works perfectly in VCV Rack 'host' (even lights up UA!)
Very weird.
Last edited by SLiC on Sat Dec 08, 2018 6:43 pm, edited 2 times in total.
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 11156 posts since 2 Dec, 2004 from North Wales
Has no one else had these issues?
Last edited by SLiC on Sun Dec 09, 2018 3:21 pm, edited 1 time in total.
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 11156 posts since 2 Dec, 2004 from North Wales
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
- KVRAF
- 9576 posts since 16 Dec, 2002
Win10 64bitSLiC wrote: ↑Fri Dec 07, 2018 8:55 pm Hi all
Late to the party, just got BYOME- weird problem - everything fine in Cubase but in Bitwig and Studio One 4 I cant make connections with the virtual cables (but all patches work with cables when loaded)
Also Rolli lightpad module doesn't work in any DAW for me (tried Cubase, BWS, Studio One), no midi input showing up, just says 'none'.....but works perfectly in VCV Rack 'host' (even lights up UA!)
Very weird.
Working fine in Bitwig 2.3.5 and Studio One 4.1.1
Are you sure youre trying to make valid connections ?
ie outputs of mods to input of destinations
Amazon: why not use an alternative
-
- KVRAF
- 11156 posts since 2 Dec, 2004 from North Wales
Thank you for getting back to me.VariKusBrainZ wrote: ↑Sun Dec 09, 2018 4:09 pmWin10 64bitSLiC wrote: ↑Fri Dec 07, 2018 8:55 pm Hi all
Late to the party, just got BYOME- weird problem - everything fine in Cubase but in Bitwig and Studio One 4 I cant make connections with the virtual cables (but all patches work with cables when loaded)
Also Rolli lightpad module doesn't work in any DAW for me (tried Cubase, BWS, Studio One), no midi input showing up, just says 'none'.....but works perfectly in VCV Rack 'host' (even lights up UA!)
Very weird.
Working fine in Bitwig 2.3.5 and Studio One 4.1.1
Are you sure youre trying to make valid connections ?
ie outputs of mods to input of destinations
Yes, connections are valid (it works fine and I am using it in my other hosts).
Very weird, its obviously something about my system - I am 4K with scaling and Bitwig and S1 use scaling so I will try investigating that....
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 11156 posts since 2 Dec, 2004 from North Wales
That's it, cracked it.
As I am on 4K I have windows level scaling on at 125%.
With that set it as not working (finding connection points) in Bitwig and S1 4, with scaling off it works,
I will let Unfiltered Audio know.
As I am on 4K I have windows level scaling on at 125%.
With that set it as not working (finding connection points) in Bitwig and S1 4, with scaling off it works,
I will let Unfiltered Audio know.
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 11156 posts since 2 Dec, 2004 from North Wales
Just out of interest if you have 5 minutes try then with windows scaling set to 125% (right click on desktop, display settings) to see if it reproduces, thanks.VariKusBrainZ wrote: ↑Sun Dec 09, 2018 4:09 pmWin10 64bitSLiC wrote: ↑Fri Dec 07, 2018 8:55 pm Hi all
Late to the party, just got BYOME- weird problem - everything fine in Cubase but in Bitwig and Studio One 4 I cant make connections with the virtual cables (but all patches work with cables when loaded)
Also Rolli lightpad module doesn't work in any DAW for me (tried Cubase, BWS, Studio One), no midi input showing up, just says 'none'.....but works perfectly in VCV Rack 'host' (even lights up UA!)
Very weird.
Working fine in Bitwig 2.3.5 and Studio One 4.1.1
Are you sure youre trying to make valid connections ?
ie outputs of mods to input of destinations
Also BYOME seems to have no 'disable hi-dpi mode' in the individual plug in settings, all the other VST's do, but you will probably on see this if you have hi-dpi mode on.
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRist
- 57 posts since 22 Dec, 2012 from Germany
Really hope the Update comes soon and will adress the issues mentioned in this thread.
I was looking forward to the Plugin Alliance All Update in the middle of November, but Byome seems to have been left out so far
I was looking forward to the Plugin Alliance All Update in the middle of November, but Byome seems to have been left out so far