Instant Phaser & Instant Flanger - SAVE OVER 75% OFF THESE CLASSICS

Official support for: eventide.com
Post Reply New Topic
RELATED
PRODUCTS

Post

Own each of these updated classics for only $29 each. Purchase on the KVR store or here: https://store.eventideaudio.com/pages/i ... 1563845385.

Image
Own the Original Studio Phaser

Released in 1971, the Eventide Instant Phaser began the studio effects revolution by successfully simulating tape flanging, an effect that’s been at the core of legendary albums for the last five decades. Modeled on the original hardware unit, the Instant Phaser Mk II plug-in accomplishes the same legendary sound with all the analog personality, smooth modulations, and inherent musicality. The capabilities have been expanded, and now you can even take your phaser on an excursion from the 70s far into the future with the delightfully characteristic “Age” knob. Outfitted with a complete host of control options, the Instant Phaser Mk II is out of the rack and into your plugin arsenal.

Add Age for component drift with time
Offers three different flavors of phasing with the Mode switch: Shallow, Deep, and Wide
Utilize one of four distinct methods to control the phasing
Depth allows you to combine the phased signal with the dry signal
Added Side Chain function allows you to trigger the Envelope Follower from a separate source in the mix for inter-track mingling
Exercise total control of the Oscillator with Sync and Retrig controls
Use Feedback control for a more pronounced sound
Includes standard gain input and output

The Instant Flanger Mk II brings the great sound of vintage tape flanging to your plug-in toolbox. An authentic emulation of the original 1975 studio rackmount, the Instant Flanger was famously used on David Bowie’s “Ashes to Ashes” and Cyndi Lauper’s “Time After Time." A truly versatile tool, engineers and producers have used it for stereo sweetening, subtle modulations, double tracking, and extreme flanging effects.

Spread the Sound Around with Pseudo Stereo

Turn flat mono guitars into huge stereo leads or have your single channel synthesizer fill out the sides of your mix with pseudo stereo. The Instant Flanger Mk II has dual outputs that create three different sonic images - “Shallow”, “Deep”, and “Wide”. Combining “Wide” Mode with the “Low Cut” control is an easy way to place multiple harmonies behind the lead. Fine-tune the resonance of your flanging effect by using the “Depth” and “Feedback” controls.

True End-to-end Emulation

Tape machines use servo motors to run at constant speed and when an engineer pressed a thumb on the flange and then suddenly let go, the capstan motor servo reacts - overshooting and undershooting as it seeks to recover proper speed. In other words, it ‘bounces’. The Instant Flanger convincingly mimicked this behavior with its innovative "Bounce" control knob. Use this feature to add a real world groove to your tracks.

Depth controls the intensity of the effect. 100% adds the delayed signal to the dry signal. -100 % subtracts the dry signal from the delayed signal
Three distinct flavors of flanging. Set the Mode switch for Shallow, Deep or Wide
Manual control allows you to control the ‘comb’ effect by turning the Big Knob
Oscillator drives the flanging at a user defined rate
Envelope Follower drives the flanging based on the signal’s amplitude
Remote maps the flanging control to a mod wheel for tactile manipulation
Bounce mimics the distinctive effect of the tape machine’s capstan motor “hunting” for its proper speed when the engineer's thumb was lifted from the tape reel flange
“Side Chain” allows for triggering the Envelope Follower from any source in the mix for inter-track mingling
Exercise total control of the Oscillator with Sync and Retrig
Tame the intensity by removing low frequencies from the flanged signal with the Low Cut control

Instant Flanger
The Instant Flanger Mk II brings the great sound of vintage tape flanging to your plug-in toolbox. An authentic emulation of the original 1975 studio rackmount, the Instant Flanger was famously used on David Bowie’s “Ashes to Ashes” and Cyndi Lauper’s “Time After Time." A truly versatile tool, engineers and producers have used it for stereo sweetening, subtle modulations, double tracking, and extreme flanging effects.

Spread the Sound Around with Pseudo Stereo

Turn flat mono guitars into huge stereo leads or have your single channel synthesizer fill out the sides of your mix with pseudo stereo. The Instant Flanger Mk II has dual outputs that create three different sonic images - “Shallow”, “Deep”, and “Wide”. Combining “Wide” Mode with the “Low Cut” control is an easy way to place multiple harmonies behind the lead. Fine-tune the resonance of your flanging effect by using the “Depth” and “Feedback” controls.

True End-to-end Emulation

Tape machines use servo motors to run at constant speed and when an engineer pressed a thumb on the flange and then suddenly let go, the capstan motor servo reacts - overshooting and undershooting as it seeks to recover proper speed. In other words, it ‘bounces’. The Instant Flanger convincingly mimicked this behavior with its innovative "Bounce" control knob. Use this feature to add a real world groove to your tracks.

Depth controls the intensity of the effect. 100% adds the delayed signal to the dry signal. -100 % subtracts the dry signal from the delayed signal
Three distinct flavors of flanging. Set the Mode switch for Shallow, Deep or Wide
Manual control allows you to control the ‘comb’ effect by turning the Big Knob
Oscillator drives the flanging at a user defined rate
Envelope Follower drives the flanging based on the signal’s amplitude
Remote maps the flanging control to a mod wheel for tactile manipulation
Bounce mimics the distinctive effect of the tape machine’s capstan motor “hunting” for its proper speed when the engineer's thumb was lifted from the tape reel flange
“Side Chain” allows for triggering the Envelope Follower from any source in the mix for inter-track mingling
Exercise total control of the Oscillator with Sync and Retrig
Tame the intensity by removing low frequencies from the flanged signal with the Low Cut control

Own each of these updated classics for only $29 each. Purchase on the KVR store or here: https://store.eventideaudio.com/pages/i ... 1563845385.

Post

Cool stuff, cool price!


PS: I already have them...

Post Reply

Return to “Eventide”