DIY help

[BertKoor]

May I ask, what does "NTF" stand for?

And, oof, I don't remember what it stands for.

Kinda weird... it's the last three letters of your membername, you made it up some months ago

[Fox_GAMING_NTF]

Are there any places where I can get just the basic parts of a MIDI keyboard
(Keyboard, Pre-wired, knobs, pads, etc? / Parts that I can just plug right into a breadboard, for example))

Doepfer. Even do digital boards for the MIDI side of things.

http://www.doepfer.de/zubeh_e.htm#Keybeds

Doepfer doesn't seem to have any 44-key keybeds, or any Pre-wired things, either.

Nobody has 44-key keybeds. And nobody does the kind of prewired that you seem to be talking about; components for DIY arent prewired because no two people looking for a DIY solution are looking for the same thing in the first place. Prewired is for finished things, not parts, the difference is kind of intrinsic.
What Doepfer do do is the controller hardware and the logic boards. The wiring required is literally that; the wires between the hardware and ready-to-go controller. You wont get more prewired as parts than that.

Ok, thanks. Do you have any links for a 49-key Keyboard like that?

Like I already said, Doepfer. They do a 49-note keybed, and 'no programming needed' controllers that can be connected to them.

Is there a link to one at Doepfer that you can give me?

[whyterabbyt]

Doepfer. Even do digital boards for the MIDI side of things.

http://www.doepfer.de/zubeh_e.htm#Keybeds

Doepfer doesn't seem to have any 44-key keybeds, or any Pre-wired things, either.

Nobody has 44-key keybeds. And nobody does the kind of prewired that you seem to be talking about; components for DIY arent prewired because no two people looking for a DIY solution are looking for the same thing in the first place. Prewired is for finished things, not parts, the difference is kind of intrinsic.
What Doepfer do do is the controller hardware and the logic boards. The wiring required is literally that; the wires between the hardware and ready-to-go controller. You wont get more prewired as parts than that.

Ok, thanks. Do you have any links for a 49-key Keyboard like that?

Like I already said, Doepfer. They do a 49-note keybed, and 'no programming needed' controllers that can be connected to them.

Is there a link to one at Doepfer that you can give me?

I gave you the link, first time I posted in this thread. Its the one you've quoted every time you've replied to me; 3 times now. Ive quoted it every time I replied to you. Its right in the middle of what Im quoting right here. Look upwards....

[Fox_GAMING_NTF]

Are there any places where I can get just the basic parts of a MIDI keyboard
(Keyboard, Pre-wired, knobs, pads, etc? / Parts that I can just plug right into a breadboard, for example))

Doepfer. Even do digital boards for the MIDI side of things.

http://www.doepfer.de/zubeh_e.htm#Keybeds

Doepfer doesn't seem to have any 44-key keybeds, or any Pre-wired things, either.

Nobody has 44-key keybeds. And nobody does the kind of prewired that you seem to be talking about; components for DIY arent prewired because no two people looking for a DIY solution are looking for the same thing in the first place. Prewired is for finished things, not parts, the difference is kind of intrinsic.
What Doepfer do do is the controller hardware and the logic boards. The wiring required is literally that; the wires between the hardware and ready-to-go controller. You wont get more prewired as parts than that.

Ok, thanks. Do you have any links for a 49-key Keyboard like that?

Like I already said, Doepfer. They do a 49-note keybed, and 'no programming needed' controllers that can be connected to them.

I understand, but do you have any links to the specific keybeds(s), because I don't remember being able to find anything about them.

[Fox_GAMING_NTF]

Doepfer. Even do digital boards for the MIDI side of things.

http://www.doepfer.de/zubeh_e.htm#Keybeds

Doepfer doesn't seem to have any 44-key keybeds, or any Pre-wired things, either.

Nobody has 44-key keybeds. And nobody does the kind of prewired that you seem to be talking about; components for DIY arent prewired because no two people looking for a DIY solution are looking for the same thing in the first place. Prewired is for finished things, not parts, the difference is kind of intrinsic.
What Doepfer do do is the controller hardware and the logic boards. The wiring required is literally that; the wires between the hardware and ready-to-go controller. You wont get more prewired as parts than that.

Ok, thanks. Do you have any links for a 49-key Keyboard like that?

Like I already said, Doepfer. They do a 49-note keybed, and 'no programming needed' controllers that can be connected to them.

I understand, but do you have any links to the specific keybeds(s), because I don't remember being able to find anything about them.

Ok, I think I may have found something, however, it's a huge wall of text, and I don't know what to look for. Any ideas for the specific names of some, as well?
http://www.doepfer.de/preise.htm#Zubeh% ... ccessories

[whyterabbyt]

use your browser to search for '49' : it'll be the first one you find beside the word 'keyboard'

[thecontrolcentre]

http://www.emismusic.co.uk/doepfer_oem.html

[Fox_GAMING_NTF]

use your browser to search for '49' : it'll be the first one you find beside the word 'keyboard'

Ok, thanks!

[Fox_GAMING_NTF]

http://www.emismusic.co.uk/doepfer_oem.html

Thanks Soo much! This link is very helpful! Any idea where I can get Square-Rubber-Touchpads?

[thecontrolcentre]

https://www.instructables.com/id/A-posi ... -drum-pad/

[Fox_GAMING_NTF]

https://www.instructables.com/id/A-posi ... -drum-pad/

Are there any pre-made ones?

[vurt]

pre made diy?

[BertKoor]

pre made diy?

He wants the IKEA-style of DIY

[Fox_GAMING_NTF]

pre made diy?

He wants the IKEA-style of DIY

Lol, I guess, sort of. I'm fine with wiring it up, I'm just trying to find where I can get the parts.

[BertKoor]

There's a lot more to it than just connecting up the parts.
It won't just magically work.