Beat707 NXT, PreOrder Ready

...and how to do so...
User avatar
WilliamK
KVRAF
4954 posts since 12 Jun, 2001 from Wusik Dot Com

Post Sat Aug 19, 2017 10:43 am

Beat707 NXT, PreOrder Ready!

https://www.youtube.com/watch?v=IY8pkO1xIWE

Use the following link to PreOrder, only $ 29.95 USD + Shipping.

https://www.paypal.com/cgi-bin/webscr?c ... EVMA3NTVPY

Detailed information

- 16 Drum Tracks (note on/off, 3 velocity values).
- 1 Accent Track. But each step can be set: Accent Track, Min or Max.
- 8 Note Tracks (note number, 3 velocity values). Steps have the option of Slide and Note Off.
- 30 Songs.
- 64 Patterns per Song.
- 16 Steps on screen, plus ABCD variations for a total of 64 steps.
- Double Steps (in between steps option when editing the steps).
- MIDI Processor Per Track. EG: Fade In, Fade Out, Fade InOut, Fade OutInt, Random Velocity and more.
- Simple Hardware design, based on the easy to find TM1638 IC based boards. Just seach on eBay and you should be able to find several options. We used 3 boards that has 8 x buttons, 8 x LEDs and 8 x LED_Segments. Such as THIS one. The board uses a single ATmega328 running at 3.3V, one FLASH chip for storage and connections for the TM1638 boards.

Errata: the PreOrder is just for the Main PCB, NOT the 3 x TM1638 PCBs seen in the video.
The Main PCB Has the ATmega328 (Arduino compatible) IC and the Flash Memory, and has a 5V USB Input for power and MIDI Output connector.
Keep in mind this: to run the whole thing you need the Main PCB, the 3 x TM1638 boards and that's all.

https://www.paypal.com/cgi-bin/webscr?c ... EVMA3NTVPY

Product Page on our site:
http://www.beat707.com/w/purchase/beat707-nxt

Cheers, WilliamK
http://www.Beat707.com

User avatar
WilliamK
KVRAF
4954 posts since 12 Jun, 2001 from Wusik Dot Com

Re: Beat707 NXT, PreOrder Ready

Post Mon Aug 21, 2017 6:42 am

Errata: the PreOrder is just for the Main PCB, NOT the 3 x TM1638 PCBs seen in the video.
The Main PCB Has the ATmega328 (Arduino compatible) IC and the Flash Memory, and has a 5V USB Input for power and MIDI Output connector.
Keep in mind this: to run the whole thing you need the Main PCB, the 3 x TM1638 boards and that's all.

Return to “DIY: Build it and they will come”