Bonjour,
Before buying the vaz modular i want to test the midi connection:
with the demo (3.2) i get a dodulation of a simple sine wave but i didn't have a frequency for a key down (korg nano pad).
does anybody can explain me witch modul and config must i use,
thank for your help.
how to use a midi keyboard
-
- KVRer
- Topic Starter
- 1 posts since 1 Nov, 2011 from France
-
- KVRian
- 513 posts since 9 Nov, 2000
Hi french_fab,
Firstly I think it would be a good idea to program the NanoPad to produce useful MIDI messages, there is a mode to send a Note On when a pad is pressed, then a Note Off when the touch is removed.
A really minimal patch would use CV Converter and WT Voice modules. Select CV 1 Note High as the Pitch source and CV 1 Gate as the Gate source on the WTVoice module. Now select WTVoice 1 as the Left and Right sources on Master Controls. Click the note button on the CV Converter module to check everything is working.
If pads on the NanoPad are configured as suggested you should be able to play a few notes. The right-click MIDI Learn... feature on sliders could be tested using the touch pad on the NanoPad.
I think with some careful setup you could do pretty complex things with a NanoPad and VazMod!
Martin
Firstly I think it would be a good idea to program the NanoPad to produce useful MIDI messages, there is a mode to send a Note On when a pad is pressed, then a Note Off when the touch is removed.
A really minimal patch would use CV Converter and WT Voice modules. Select CV 1 Note High as the Pitch source and CV 1 Gate as the Gate source on the WTVoice module. Now select WTVoice 1 as the Left and Right sources on Master Controls. Click the note button on the CV Converter module to check everything is working.
If pads on the NanoPad are configured as suggested you should be able to play a few notes. The right-click MIDI Learn... feature on sliders could be tested using the touch pad on the NanoPad.
I think with some careful setup you could do pretty complex things with a NanoPad and VazMod!
Martin