KVR Audio

adamszabo · Post by **adamszabo** » Mon Apr 08, 2019 8:20 am

D.K Envelope wrote: ↑Mon Apr 08, 2019 12:42 am two bugs not one
dont forget the knob stuttering that drives me crazy

Its not a bug, I probably did something wrong, thats why I have to rewrite the entire gui code from scratch

adamszabo · Post by **adamszabo** » Mon Apr 08, 2019 8:23 am

Vertion wrote: ↑Mon Apr 08, 2019 12:57 am Adam, I tried using your contact form to request the JP6K 64bit update about a month ago. So far I have heard nothing back.

I sent you a PM

eyezermusic · Post by **eyezermusic** » Mon Apr 08, 2019 7:26 pm

Since people talk about bugs in here atm, I can address a bug I've found in Viper relating to waveforms.
If I use custom waveforms in a patch in a project and later on close the project and re-open the project, the custom waveform will not load in Viper. Instead, it will load a waveform from the factory folder. See video here:
https://www.youtube.com/watch?v=tfCW3-J ... e=youtu.be

This also happens with factory patches as well if I save a project, shut down FL Studio and then re-open FL Studio and the project: https://i.imgur.com/E9OLki9.jpg You can see here how it loads sync2 in osc 1 & 3, but on osc 3 it says wave06 but the sound is sync2 waveform.

Could possibly be a FL Studio 20 problem since I've had issues with FL Studio deleting my loaded plugins in the mixer on at least 2 occasions before. I've had problems in FL Studio with knobs moving in ways the shouldn't in Viper and Sylenth1.

nix808 · Post by **nix808** » Mon Apr 08, 2019 8:40 pm

D.K Envelope wrote: ↑Mon Apr 08, 2019 12:42 am two bugs not one
dont forget the knob stuttering that drives me crazy

I would have to look at Adam's control build-
AFAIK this doesn't always happen
Here's the Bitwig test of my Ruby piano roll->
*oh I see that Adam has replied

Pyrotek45 · Post by **Pyrotek45** » Tue Apr 09, 2019 1:20 am

adamtrance wrote: ↑Mon Apr 08, 2019 8:20 am
D.K Envelope wrote: ↑Mon Apr 08, 2019 12:42 am two bugs not one
dont forget the knob stuttering that drives me crazy
Its not a bug, I probably did something wrong, thats why I have to rewrite the entire gui code from scratch

"Its not a bug, I probably did something wrong"

I love this line HAHA

D.K Envelope · Post by **D.K Envelope** » Tue Apr 09, 2019 4:08 am

i must say that i respect Adam
and i think he is working on it
i think we must understand that he worked alone on this
one man show

as soon i see an update i come back to viper but not now

adamszabo · Post by **adamszabo** » Tue Apr 09, 2019 5:22 am

eyezermusic wrote: ↑Mon Apr 08, 2019 7:26 pm Since people talk about bugs in here atm, I can address a bug I've found in Viper relating to waveforms.

Can you please PM me your waveform folder so I can test it with your file structure as well

antic604 · Post by **antic604** » Thu Apr 11, 2019 11:26 am

adamtrance wrote: ↑Mon Apr 08, 2019 8:20 amIts not a bug, I probably did something wrong, thats why I have to rewrite the entire gui code from scratch

@Adam, other than the above, what are the plans for Viper going forward? Does GUI rewrite also include change of the overall appearance, because current one is rather basic / simplistic? What about new filter types, more types of oscillators, more flexible effects, more convenient modulation matrix, better browser (I don't get the idea of banks), etc?

I'm really tempted to finally buy it, but paying the full price I'd love to know where its heading. Not necessarily when, because I'm aware it's a one-man show

adamszabo · Post by **adamszabo** » Thu Apr 11, 2019 11:38 am

@antic604, Yes there are lots of plans for the future. I dont think I will be able to change the browser and the matrix, those are fixed, I think loading banks works fine.

Regarding the GUI rewrite I hope to increase the performance of the GUI, plus faster loading times (I believe its related to that), and also user skins so everyone can change the appearance to their liking. I will also add wavetable oscillators so you can load wavetables from serum and other synths. Then of course new effetcs, and an update to the reverb, plus I want to strip out the reverb and make it a little free plugin, a lot of people would like that.

However, fixing bugs are the first priority, once there are no more issues then I can add new features

antic604 · Post by **antic604** » Thu Apr 11, 2019 12:01 pm

adamtrance wrote: ↑Thu Apr 11, 2019 11:38 am @antic604, Yes there are lots of plans for the future. I dont think I will be able to change the browser and the matrix, those are fixed, I think loading banks works fine.

Regarding the GUI rewrite I hope to increase the performance of the GUI, plus faster loading times (I believe its related to that), and also user skins so everyone can change the appearance to their liking. I will also add wavetable oscillators so you can load wavetables from serum and other synths. Then of course new effetcs, and an update to the reverb, plus I want to strip out the reverb and make it a little free plugin, a lot of people would like that.

However, fixing bugs are the first priority, once there are no more issues then I can add new features

Lovely, thanks!

kmonkey · Post by **kmonkey** » Fri Apr 12, 2019 3:31 pm

starflakeprj wrote: ↑Sat Apr 06, 2019 1:47 pm I wonder if people living in EU (especially those claiming it is illegal not allowing re-selling of software), who purchases software from JRR Shop, AudioDeluxe, PluginDiscounts, Sweetwater, EveryPlugin and other similar online stores, are adding their purchases to their yearly declaration and pay the VAT to their government, like they should?

I smell irony. Sadly from what you said above it seems to me you are not aware how VAT things work in the first place.

Store is selling something with VAT added already. You pay it when you order something. If you are buying as a company different terms could be applied. You do not pay double VAT what are you talking about? I never heard anyone paying VAT to something they bought (and paid VAT) at the end of the year.

Let me ask you other way. Perhaps you'll get it. You buy a coffee in bar. You already paid VAT. Do you list it on your yearly declaration and you you pay VAT for it (again). What are you talking about?

Before we do in types of goods and different VAT rates - i visited this thread to see plugin progress but last two pages are spreading misconceptions and licensing talk.

Can we get on topic? You can PM me for your VAT questions.

kmonkey · Post by **kmonkey** » Fri Apr 12, 2019 3:34 pm

adamtrance wrote: ↑Thu Apr 11, 2019 11:38 am Then of course new effetcs, and an update to the reverb, plus I want to strip out the reverb and make it a little free plugin, a lot of people would like that.

New effects...Wow...

Then Viper reverb for FreEEEee yessss

PiotrPochwat · Post by **PiotrPochwat** » Sun Apr 21, 2019 2:01 pm

I found next bug. I see problem with ''random'' function in mod matrix. For example: I add random (source) to filter cut off in mod matrix. When I renderig track to the file, sound is completely different than in daw.

adamszabo · Post by **adamszabo** » Mon Apr 22, 2019 5:31 am

PiotrPochwat wrote: ↑Sun Apr 21, 2019 2:01 pm I found next bug. I see problem with ''random'' function in mod matrix. For example: I add random (source) to filter cut off in mod matrix. When I renderig track to the file, sound is completely different than in daw.

Thats not a bug, its expected behavior, other synths do it the same way. Random function create random values that do not repeat, its going to sound different every time you play it even in the daw and when you export it.

PiotrPochwat · Post by **PiotrPochwat** » Mon Apr 22, 2019 12:22 pm

Adam, you understand me.

Sound is random only when viper play in daw. When You render to the file, sound is completely different - not random with every midi note. This is no normal.

I see problem with random function when sound is rendering.

Viper｜1.2.2 update with bugfixes and new skin