Thank you! .Yeager wrote:Go here : I have send you a PMzxant wrote:Download where?thecontrolcentre wrote:Click the facebook link and download as guest member. Works here.zxant wrote:
Where and how does one download this T-C-M? I don't use Facebook, Yahoo or other s.m.
Sorry, don't know what you mean ...! .
Trans Computer Maschine v2.6
-
- KVRian
- 1134 posts since 22 Aug, 2004 from Edge City, the Low Country
-
thecontrolcentre thecontrolcentre https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=76240
- KVRAF
- 35162 posts since 27 Jul, 2005 from the wilds of wanny
Go to the product page for TCM and click download. You will be taken to a download page with facebook or google drive download options. Click the facebook link. You will then get various options, one of which is "download as guest member" ... click and download. I don't use facebook, yahoo groups etc either, but this one works for everyone (hopefully).zxant wrote:Download where?thecontrolcentre wrote:Click the facebook link and download as guest member. Works here.zxant wrote:
Where and how does one download this T-C-M? I don't use Facebook, Yahoo or other s.m.
Sorry, don't know what you mean ...! .
-
- KVRian
- 1134 posts since 22 Aug, 2004 from Edge City, the Low Country
Well I do not get that option, only get an annoying popup on the fb page that covers about 1/3 of the page.thecontrolcentre wrote:Go to the product page for TCM and click download. You will be taken to a download page with facebook or google drive download options. Click the facebook link. You will then get various options, one of which is "download as guest member" ... click and download. I don't use facebook, yahoo groups etc either, but this one works for everyone (hopefully).zxant wrote:Download where?thecontrolcentre wrote:Click the facebook link and download as guest member. Works here.zxant wrote:
Where and how does one download this T-C-M? I don't use Facebook, Yahoo or other s.m.
Sorry, don't know what you mean ...! .
But I got it sorted for now via an alternative way (see two earlier posts)
Thanks anyways for the info .
"Kids! Get off my lawn!"
-
thecontrolcentre thecontrolcentre https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=76240
- KVRAF
- 35162 posts since 27 Jul, 2005 from the wilds of wanny
No worries. Turns out the version I got is a 32 bit plugin in anyway. I thought there was a 64 bit update.
-
- KVRAF
- 11034 posts since 19 Jun, 2008 from Seattle
Right-click/Save Link As T-C-M_2.30.b5zxant wrote: ... Download where?
I'm not a musician, but I've designed sounds that others use to make music. http://soundcloud.com/obsidiananvil
- KVRAF
- 6322 posts since 18 Jul, 2008 from New York
It's SynthEdit.thecontrolcentre wrote:No worries. Turns out the version I got is a 32 bit plugin in anyway. I thought there was a 64 bit update.
- KVRist
- 399 posts since 26 Aug, 2011 from somewhere under the rainbow
Doesn't work, unless You joined the Y! group.Shabdahbriah wrote:Right-click/Save Link As T-C-M_2.30.b5zxant wrote: ... Download where?
You have to be a member of the CMT Yahoo group to get access to the attachments and files.
And it's b6 already.
-
- KVRian
- 1134 posts since 22 Aug, 2004 from Edge City, the Low Country
Yep, those Yahoo links are useless.Kumi_27 wrote:Doesn't work, unless You joined the Y! group.Shabdahbriah wrote:Right-click/Save Link As T-C-M_2.30.b5zxant wrote: ... Download where?
You have to be a member of the CMT Yahoo group to get access to the attachments and files.
And it's b6 already.
But the matter already got sorted so I'm good now. .
"Kids! Get off my lawn!"
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
Trans Computer Maschine v2.30 beta 6 (Release Candidate) out now!
v2.30 beta 6
- Fixed Sequencer buttons 'toggling' not responding to first MIDI messages.
- Fixed Sequencer rows 'presets' lost after loading or copying to patch 1.
- Fixed typed input validation not working when last value was set to 0.
v2.30 beta 5
- Added double triggered 'Seq Gate' to Envelopes gate sources.
- Added 'KBD Gate' to Env auto-enabled when sequencer is not started.
- Added 'LFO' activity indicator.
- Added 'Lower' range extender to Osc frequency modulation sources.
- Added Oscillators patch change 'KBD Memory' enabler/disabler.
- Added Patch selection GUI controls.
- Added selection displays for expanded 'Filter' modulation destinations.
- Fixed at last un-synced 'LFO' frequency messed up after patch change.
- Fixed Oscillators 'Low F' switches not working with 'Seq In' enabled.
- Fixed Sequencer active 'LED' shift after it was stopped.
- Fixed Sequencer reset shift in 'Pendulum' modes.
- Fixed Sequencer 'Set' buttons shift when gating via Synth Channel.
- Fixed Sequencer 'Sync' altering 'Tempo' setting after patch change.
- Fixed/changed S/H Mixer behaviour for 'Expand' sources.
- Improved (further) 'LFO' phase-alignment with sequencer stepping.
- Improved modulation at audio rates.
- Improved 'Noise Colour' modulation and added S/H signal source.
- Improved Sequencer sync for varying tempo use.
- Improved stepped response for 'Interval' and 'Transpose' Seq knobs.
- Renamed some parameters and updated GUI.
- Replaced Sequencer 'Transpose' values with selectable octave ranges.
- Revised and optimized code.
Hold on!
The CMT Team
v2.30 beta 6
- Fixed Sequencer buttons 'toggling' not responding to first MIDI messages.
- Fixed Sequencer rows 'presets' lost after loading or copying to patch 1.
- Fixed typed input validation not working when last value was set to 0.
v2.30 beta 5
- Added double triggered 'Seq Gate' to Envelopes gate sources.
- Added 'KBD Gate' to Env auto-enabled when sequencer is not started.
- Added 'LFO' activity indicator.
- Added 'Lower' range extender to Osc frequency modulation sources.
- Added Oscillators patch change 'KBD Memory' enabler/disabler.
- Added Patch selection GUI controls.
- Added selection displays for expanded 'Filter' modulation destinations.
- Fixed at last un-synced 'LFO' frequency messed up after patch change.
- Fixed Oscillators 'Low F' switches not working with 'Seq In' enabled.
- Fixed Sequencer active 'LED' shift after it was stopped.
- Fixed Sequencer reset shift in 'Pendulum' modes.
- Fixed Sequencer 'Set' buttons shift when gating via Synth Channel.
- Fixed Sequencer 'Sync' altering 'Tempo' setting after patch change.
- Fixed/changed S/H Mixer behaviour for 'Expand' sources.
- Improved (further) 'LFO' phase-alignment with sequencer stepping.
- Improved modulation at audio rates.
- Improved 'Noise Colour' modulation and added S/H signal source.
- Improved Sequencer sync for varying tempo use.
- Improved stepped response for 'Interval' and 'Transpose' Seq knobs.
- Renamed some parameters and updated GUI.
- Replaced Sequencer 'Transpose' values with selectable octave ranges.
- Revised and optimized code.
Hold on!
The CMT Team
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
WE ARE BUSY! Trans Computer Maschine v2.30 beta 7 (Release Candidate 2) for our fans!
This update is especially dedicated to our fans. Since we're a little late with the new factory library, we decided to include a feature in "T-C-M II" we had reserved for the forthcoming "T-C-M III": the sequencer 'Multi-Skip' controls. Using these controls you can jump several steps at once with a single click of the mouse which is extremely useful either for programming a sequence or changing it on the fly during a performance.
We hope you enjoy this new super cool feature!
Cheers!
The CMT Team
This update is especially dedicated to our fans. Since we're a little late with the new factory library, we decided to include a feature in "T-C-M II" we had reserved for the forthcoming "T-C-M III": the sequencer 'Multi-Skip' controls. Using these controls you can jump several steps at once with a single click of the mouse which is extremely useful either for programming a sequence or changing it on the fly during a performance.
We hope you enjoy this new super cool feature!
Cheers!
The CMT Team
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
We are so excited about the new version 2.5 of our 'T-C-M' that we could not stop sharing it before finishing it. This pre-release version is practically the definitive one, it only remains to complete the 128 presets, please help us by letting us know as soon as possible if you find any errors so we try to fix it before the final release.
https://clyp.it/dee0sfef
v2.50
- Added Oscillators MIDI input 'RESET'.
- Added Sequencer internal gating options for 'Pitch' and 'Ctrls' outputs.
- Added Sequencer start step setting (Synth Ch. Reset menu).
- Changed 'inverted Envelopes' behaviour to unipolar negative.
- Fixed 'LFO' triggering noise click after changing patch.
- Fixed Sequencer 'Pulse Width' showing slightly offset values.
- Fixed Sequencer reset shift in 'Pendulum' modes.
- Improved 'Filter' modulation indicators.
- Improved GUI, disabling filters on inactive 'Audio Mixer' buses.
- Improved Sequencer external/human triggering and gating.
- Improved Sequencer 'Random' mode algorithm.
- Improved Sequencer 'Skip' and 'ON' buttons interaction.
- Improved value displays, discarding decimals for very large numbers.
The CMT Team
https://clyp.it/dee0sfef
v2.50
- Added Oscillators MIDI input 'RESET'.
- Added Sequencer internal gating options for 'Pitch' and 'Ctrls' outputs.
- Added Sequencer start step setting (Synth Ch. Reset menu).
- Changed 'inverted Envelopes' behaviour to unipolar negative.
- Fixed 'LFO' triggering noise click after changing patch.
- Fixed Sequencer 'Pulse Width' showing slightly offset values.
- Fixed Sequencer reset shift in 'Pendulum' modes.
- Improved 'Filter' modulation indicators.
- Improved GUI, disabling filters on inactive 'Audio Mixer' buses.
- Improved Sequencer external/human triggering and gating.
- Improved Sequencer 'Random' mode algorithm.
- Improved Sequencer 'Skip' and 'ON' buttons interaction.
- Improved value displays, discarding decimals for very large numbers.
The CMT Team
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
Oh my. Love this thing. Glad you are updating it.
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp
-
- KVRist
- Topic Starter
- 133 posts since 2 Aug, 2012
New version out there!
Listen a sound clip! https://clyp.it/dee0sfef
v2.50
- Added Oscillators MIDI input 'RESET'.
- Added Sequencer 'Clock' indicator in 'Synth Ch.' display for 'Gate' mode.
- Added Sequencer internal gating options for 'Pitch' and 'Ctrls' outputs.
- Added Sequencer start step setting (Synth Ch. Reset menu).
- Added un-synced 'LFO' frequency memory.
- Changed 'inverted Envelopes' behaviour to unipolar negative.
- Fixed CPU overload and Sequencer jitter while switching patches.
- Fixed Envelopes not loading set mode after loading host project.
- Fixed 'LFO' triggering noise click after changing patch.
- Fixed occasional 'LFO' resetting at wrong times.
- Fixed Sequencer 'Pulse Width' showing slightly offset values.
- Fixed Sequencer reset shift in 'Pendulum' modes.
- Fixed signal flow display messed up after loading host project.
- Fixed some switches not responding to full MIDI range.
- Improved 'Filter' modulation indicators.
- Improved filtering link, now featuring bandwidth control.
- Improved GUI, disabling filters on inactive 'Audio Mixer' buses.
- Improved Sequencer external/human triggering and gating.
- Improved Sequencer 'Random' mode algorithm.
- Improved Sequencer 'Skip' and 'ON' buttons interaction.
- Improved value displays, discarding decimals for very large numbers.
- Removed Patch selection GUI controls (was added in previous beta).
https://www.kvraudio.com/product/trans- ... echnologie
Listen a sound clip! https://clyp.it/dee0sfef
v2.50
- Added Oscillators MIDI input 'RESET'.
- Added Sequencer 'Clock' indicator in 'Synth Ch.' display for 'Gate' mode.
- Added Sequencer internal gating options for 'Pitch' and 'Ctrls' outputs.
- Added Sequencer start step setting (Synth Ch. Reset menu).
- Added un-synced 'LFO' frequency memory.
- Changed 'inverted Envelopes' behaviour to unipolar negative.
- Fixed CPU overload and Sequencer jitter while switching patches.
- Fixed Envelopes not loading set mode after loading host project.
- Fixed 'LFO' triggering noise click after changing patch.
- Fixed occasional 'LFO' resetting at wrong times.
- Fixed Sequencer 'Pulse Width' showing slightly offset values.
- Fixed Sequencer reset shift in 'Pendulum' modes.
- Fixed signal flow display messed up after loading host project.
- Fixed some switches not responding to full MIDI range.
- Improved 'Filter' modulation indicators.
- Improved filtering link, now featuring bandwidth control.
- Improved GUI, disabling filters on inactive 'Audio Mixer' buses.
- Improved Sequencer external/human triggering and gating.
- Improved Sequencer 'Random' mode algorithm.
- Improved Sequencer 'Skip' and 'ON' buttons interaction.
- Improved value displays, discarding decimals for very large numbers.
- Removed Patch selection GUI controls (was added in previous beta).
https://www.kvraudio.com/product/trans- ... echnologie
Last edited by CMT on Wed Sep 20, 2017 12:20 pm, edited 1 time in total.
- Banned
- 7624 posts since 13 Nov, 2015 from Norway
EnergyXT3 - LMMS - FL Studio | Roland SH201 - Waldorf Rocket | SoundCloud - Bandcamp
-
- KVRian
- 1359 posts since 3 Dec, 2002
Your issues with KVR aside. Seems odd to me that, you found a place to host audio clips that doesn't require jumping through hoops to listen to but have not been unable to do the same with the TCM files?