KX77FREE - 30 07 2018 > Update of all x64 VST - new releases - fixed recent bugs

[kx77free]

http://kx77free.free.fr/English-page.html

To operate the 64 bit (x64) KX77FREE plug-ins and the 32 bit (x86) version of SE PolyMod KX plug-in require MicroSoft files called "Visual C ++ Redistributable Package". These need to be installed only once on each PC that uses these plug-ins.
Link to get the 2015 version (the 2017 version is compatible, check your already installed packages):
https://www.microsoft.com/en-US/downloa ... x?id=53587

30/07/2018 - Update of main x64 plug-ins --> this one replaces the last update!
Kx Synth x16 6.08 / Kx PolyM CSE 2.08 / Kx PolyMod 2.08 / Kx Modulad 4.08 / SE PolyMod KX 1.06
- Made with the latest debugged version of SE (1.4180) and with its latest SDK3 (C++, 07 2018).
- Variable colour on background (Kx Synth x16 and Kx Modulad).
Fixed bugs of 07 versions (19 07):
- Cubase automation.
- Joystick position reset.
- Enum list parameters (some values were not saved).
- Initialization time increased (5 sec added) when the x16 sequencer is on to avoid possible Cubase initialization bugs.
SE PolyMod KX:
AU version (beta): new zip (SE 1.4180)
Win VST versions (Release): new zip (SE 1.4180)

19/07/2018 - Major update of main x64 plug-ins:
Kx Synth x16 6.07 / Kx PolyM CSE 2.07 / Kx PolyMod 2.07 / Kx Modulad 4.07 / Se PolyMod 1.05
- Releases done with the latest stable version of SE (1.3266) and with the latest SDK3 (C++).
- Build with no static DLL (x64 MicroSoft VC 2015 C++ redist package must be installed).
- Graphic bugs fixed on Seven.
- Improvement of GUI editor and DAW refresh speed.
- Hint texts work on all parameters.
- Internal menu to load directly 128 factory presets.
- Improvement of large SF2 banks loading.
SE PolyMod KX:
- Waveform drawed outside the scope area fixed.
AU version (beta): new zip (SE 1.4173)
Win VST versions (Release): new zip (SE 1.3266)

About x64 VST:

VST2 recommended for VSTHost:
Load and Save XML presets menu does not work fine on Win 10 following the configuration used (to do list).
The GUI editor of VSTHost 1.56 stays incompatible when the plug-ins are used in VST3 not in VST2.
VST3 GUI works fine only with VSTHost 1.54.

Fruity Loop:
Select "Use fixed size buffers" in the plug-in options to win 25% of CPU use!

Reaper:
Load and Save XML presets menu does not work fine on Win 10 following the configuration used (to do list).
If you listen audio "pops" when you edit something on Reaper with Asio4All.
To fix it > FX windows > Compatibility settings > "Save minimal undo steps".he GUI editor of VSTHost 1.56 stays incompatible when the plug-ins are used in VST3 not in VST2. VST3 GUI works fine only with VSTHost 1.54.

To do list:
Load and Save XML presets menu does not work fine on Win 10 following the configuration and the DAW used.


Installation example:
1- Unzip and copy the VST3 folder in "C:\Programs\Common files\VST3".

2- To operate the 64 bit (x64) KX77FREE plug-ins require MicroSoft files called "Visual C ++ Redistributable Package". These need to be installed only once on each PC that uses these plug-ins, get the 2015 version or the 2017 compatible version (check your already installed packages):
https://www.microsoft.com/en-US/downloa ... x?id=53587

3- In "Users\"your account"\Documents\VST3 Presets\xavier kalensky\"KX MODULAD", you copy all *.vstpreset files provided with the VST3.

4- If your DAW does not support VST3, change the extension of the plugin *.vst3 by *.dll (VST2) and copy the VST2 folder in "C:\Programs\Common files\VST2" or in your usual x64 VST2 folder...

5- Update the database of your DAW by scanning the plug-ins.

Note:
"Common Files" is a protected Windows system folder. Your DAW must be in Administrator mode to save the sequencer *.x16 files or your XML presets. If else you must save in your Document folder of your account or in out of protected Windows folders.

https://www.youtube.com/watch?v=VOjQLPYrJvQ

https://www.youtube.com/watch?v=oRju_09LNp8


*****************
history of updates:

19/11/2017 - Update of main x64 plug-ins (Releases - VST3 - VST2):
Kx Synth x16 6.06 / Kx PolyM CSE 2.06 / Kx PolyMod 2.06 / Kx Modulad 4.06

Various improvements and bug fixes on 64 bit versions.
Made with the latest stable version of SE (1.2412) and with the latest SDK3 (c++).
Parameter indexes have been fixed to preserve compatibility between future versions.
These versions pass the main tests of the Steinberg tool to check the VST3.
The period of beta testing with end users is over.

Fixed bugs:
- XML presets: the file extension has been replaced by *.xmlpreset.
KX SYNTH X16:
- Cubase: correct initialization of each voice when the plug-in is initialized off (button on off of the Cubase window).
- Matrix controllers: after initialization of the plug-in they switch to static mode (10% of CPU use won).
- Parameters: they have been renamed and all the parameters of the matrix have been defined in private mode (not listed in the automation of your DAW) to simplify their management.
KX POLYM CSE and all by default:
- The FX filters are correctly initialized after a sample rate change.

To help me for the beta tests:
viewtopic.php?f=23&t=480985

15/08/2017 - Update of main plug-ins (x86 - x64):
x64: Kx Synth x16 6.05 / Kx PolyM CSE 2.05 / Kx PolyMod 2.05 / Kx Modulad 4.05
x86: Kx-Synth-x16 5.2 / Kx-PolyM-CSE 1.2 / Kx-PolyMod 1.64 / Kx-Modulad 3.2
- Oscillator Sync quality improved (x86 and x64).
- Clip leds added (internal signal clipped to +6 dBFs, x64 only).
Fixed bugs:
- x64 Kx PolyM CSE: Lfo speed knob blocked.
- x86 Kx-Modulad: Render button stayed on after a waveform render if the plugin windows setting was always on front (x86 Cubase 8.5.3 on Win 10).

About the beta tests, I updated the "FOR-TESTS-ONLY.zip" with a beta of Kx Synth x16 done with the SE 1.2405 to verify the last x64 SE DSP stability.
The current betas are done with SE 1.2399.

30/06/2017 new x64 beta releases available
Fixed bugs:
- Oscillators: x64 error code (shifted WF indexes), the S/N was decreased to -90 dBFs instead of -120 dBFs.
- SFO: x64 bug, some Soundfonts were reseted always to the first bank.
- Kx Modulad: improvement of various selectors on mouse click down.

My second track 100% x64 with VST3 on 96k!
Notes: the CPU in use is now very decreased with the last releases of 19 November 2017!

https://www.youtube.com/watch?v=cGf4LjsLhvE

11/06/2017 new x64 beta releases available
Improvements:
- Midi learn.
- XML presets.
- DAW show parameters in correct order.
- Sliders: 2 or 3 significant digits after point (Kx Synth x16 and Kx Modulad).
- Skins adapted to new SE directx gamma blending feature.
Following your driver the GPU Intel HD 4000 is not supported yet (edit: buggy DX optimus laptop drivers, hd 4000 + Nvdia 620m).
Fixed bugs:
- VSTHost 1.56 works fine now with all parameters (edit : not sure... better when the plug-in is used as VST2...).
- GUI editor loading time too long.
- Frozen GUI DAW while mouse held.

03/2017 x64 beta releases available

My first track 100% x64, 14 instances of KX77FREE VST3 on 96k!
https://www.youtube.com/watch?v=jr3WD2gR8_c

02/2017 x64 work in progress:

I'm working to finalize the x64 beta versions of my main plugins. I must rewrite the help documentations, test again all in complex sessions in Cubase 8.5, Reaper and update my url...

Kx Polym-CSE 2.0
Kx PolyMod 2.0
Kx Synth x16 6.0 (Polyphonic version only)
Kx Modulad 4.0 (without the KxWaveTracer)


27/05/2016 - One track added: "KS Dream 2016 - We are digitalized", encoded in WMA 24 bit/48k.
They are available on my url in 24 bit WMA (compatible with VLC):
http://kx77free.free.fr/data/wma/2016/K ... alized.wma

https://www.youtube.com/watch?v=NycGEV6mM5M

Two track added:
"KS Dream 2016 - Live Obsession", encoded in WMA 24 bit/44.1k, Cubase session in 88.2k.
"KS Dream 2016 - Cosmic Track", encoded in WMA 24 bit/48k, Cubase session in 48k.
They are available on my url in 24 bit WMA (compatible with VLC):
http://kx77free.free.fr/data/wma/2016/K ... ession.wma
http://kx77free.free.fr/data/wma/2016/K ... -track.wma

https://www.youtube.com/watch?v=Ln0rRPTCTHY
https://www.youtube.com/watch?v=AbgY9OAG-XY

12/09/2015 - One track added: "Cold September", encoded in WMA 24 bit/44.1k, Cubase session in 88.2k.

This track is available on my url in 24 bit/44.1k WMA (compatible with VLC):
http://kx77free.free.fr/data/wma/2015/C ... tember.wma

https://www.youtube.com/watch?v=kWsRJ_SgTuA


One track added: "KS Dream 2015" encoded in WMA 24 bit, unlimited VBR.
KS-Dream-2015.wma

Thank you Mr Schulze 2015:
https://www.youtube.com/watch?v=8MEMgiSchws


Have Fun

Xavier

[thecontrolcentre]

Thanks Xavier

[core]

Thanks for the updates!

[gaf_thit]

Thank you for your splendid work.

I love your synths and your tracks.

[Diego_C]

Thank you very very much for the updates and all your works and dedication !
Bests

[Syntilla]

Just a bump for anyone who missed it. (I think it got lost among the 'lists' at the weekend.)

Finally tore myself away from the -x16 and -cse to spend some time with the Kx-Polymod. I've been trying to get up-close-and-personal with MacBeth's Elements before committing to a purchase, but two (solid) days with this synth and I'm no longer certain I even want one.
Some devs, it's almost a relief their site doesn't have a 'Donate' button.

[kx77free]

Hi Syntilla,

Yes KX77FREE's VST are a very good compromise between the sound quality and the cpu use.
You have the same type of quality (or better) than commercial vsts without an expensive cpu use. Because I oversampled only the processes which need to be: like some Filters, the Distortion, the Vca and the Ring modulator. And the SE engine permits to manage the sleep mode of each module used inside.

I'm one of the first devs who implemented the Kxmod and other great features like the matrix with mini knobs before the majority of commercial vsts. Also the SE freewares are not cheap but they can be innovative and very multi-purpose for anyone who wants just support them.

Sure the SE development is slowly because Jeff translates his baby to the compatibility to Apple and a lot of SE devs are in standby.
But I'm little disappointed by the few support to SE (or other like) in KVR because SE and SynthMaker also permitted the development of lot innovative vsts, specially in the freeware and shareware products, which forced the classic commercial products to evoluate to a better quality in the last decade.

http://kx77free.free.fr/English-page-vst.html

If I didn't put a donate button on my url, it's that I do all for me and my users without to think about of money.
I cannot sell my dream but I can share it.

Xavier

[Diego_C]

I cannot sell my dream but I can share it.

Xavier

hands down, all my respect sir.
Thanks again for sharing with us your hard work/labour of love and awesome synths.
Bests

[Syntilla]

KX77FREE's VST are a very good compromise between the sound quality and the cpu use.
...
I cannot sell my dream but I can share it.

Hi M. Kalensky,

KX77FREE is not a name I associate with compromise - of any kind!
The commercial synth I was comparing the Kx-Polymod with was this one:



Usual caveats about YT audio aside, this should give you some idea of how it sounds:

https://www.youtube.com/watch?v=qI7SjdaV_sQ#t=695
Not unlike Kx-Polymod, I'd say - and your synth is way more flexible.

Consider your dream well and truly shared.
Thank you!

[kx77free]

Hi,

Thanks to compare my vsts with this kind of hardware synths!
Sure the hardware with discrete components is normally better than vsts but generally they have a limited number of connections without any memories and they are monophonic...
So, this is why I prefer to use my vsts because now I can do what I want with SE but actually I prefer to consolidate my actual VSTs before to do others.

[Syntilla]

... to compare my vsts with this kind of hardware synths ...

And not intended to flatter, either.
Burnie describes you as an 'overdemanding developer'.
The same could be said of Ken MacBeth.
His synths/modules sure look the part, but behind those slo-mo Verniers and faux-Bakelite knobs (not to mention the gold-plated keyboard!) there's a whole lot more than the generic synth-voicecard-on-a-chip that you'll find in almost every other synthbuilder's instruments.
He's not one to substitute mere engineering technique for hard-won craftsmanship.
And, in the words of Joe Meek, 'If it sounds right - it's right'.
KX77FREE instruments - like the MacBeths - are for those who can hear the difference.

And it's not the first time I've found myself comparing your synths to €5k hardware.
As a bit of a Synthi nut, I've long had the blog at thesynthi.de bookmarked (it can now be found here http://blog.thesynthi.de/). It hasn't been updated for a couple of years, but remains an essential resource.
So when PIN and Ramcur got together to make the 'Hornet' clone http://hornet-modular.de/2index.html, my first reaction was simply 'How do I raise the money?'.
But the demo mp3s were somewhat uninspiring, and from what little other information is available, it's clear that this is a very modern-sounding clone - look at some of the waveshapes! Like all the other software emulations (apart from Couprie's, which uses samples) the sines look like sines, the triangles triangles ... on the early-model VCS3s/Sythis, the sines, squares and triangles were barely distinguishable - they all looked like a 4-year-old's attempts to draw a house.
Nothing, of course, can replace the raw, visceral thrill of actually handling a hardware modular, but ... five grand ...?
I finally stopped trying to talk myself into buying one in July last year ...
... when, after 2 years working on the PolyMods, you gave the Kx-Synth-X16 a totally unexpected update. (Modulad users must have been even more surprised!)
Along with the much-improved Traps (which is all I'd ever really hoped for) came those new filters...
The SynthiQ type has the most convincingly vintage-70s character of anything I've ever heard in software.
And the VCS3 filter type transported me right back to my earliest schooldays and the (often terrifying) sounds that used to accompany many of the BBC's educational radio programmes. (Thanks, Radiophonics Workshop - I've almost recovered now!)
Call me old-fashioned, but I still tend to judge a synth by how it sounds.
And with even the most expensive software still costing only a tiny fraction of what the early hardware did (and not only 'in real terms'), I don't think anyone who judges a synth by any other criteria should consider themselves a musician - merely a consumer.
KX77FREE synths are not only free, but priceless.

[urlwolf]

Hi Xavier,

I do think that your synths are at the top of the food chain in the free world.
I really like how everything is in a single page, and color-coded in the matrix.

One problem that I have had since I found them is that they do not work very reliably on any of the daws I tried them in: Reaper, Studio one, and FL studio. Even in the 32bit version of the daw. The latest release I tried in FLstudio and for some reason, they all stop taking mouse input.

Any idea about why that is? Any logs I could use to debug this?

Thanks!

[kx77free]

Hi,

Urlwolf@
You forgot something when the installation probably... I tested again on my classic 32 bit daws : Orion, FL, Samplitude, etc... I did not see something different than the old versions ???
Give me more details, please.
Did you uninstall the old versions before and rescanned your Vstplugins folder?

Anyway, I will download the last version of FL to check that.

******************************

This the FAQ of the Kx-PolyM-CSE :

Install infos

1- Unzip the Kx-PolyM.zip.

2- Copy the Kx-PolyM-CSE.dll and the "Kx-PolyM-CSE"* folder into your Vstplugins folder.

*Normally the plug-in copies its embedded files (*.sem, data, etc...) inside a folder with the same name when the plug-in is initialized for the first time by your host program. But sometime on Vista or Seven that doesn't work with Live, generally it is a bug about the rights. So this is why the plug-in folder is in the zip ...
You must be logged in administrator not in simple user because you must have all rights on the "vstplugins" folder generally installed in the "Program file" folder which is protected by Windows.


FAQ:

1 - Why the oscillators are muted?
You selected types or numbers for waveforms which are not inside the plug-in folder.
This plug-in uses Kx77free's waveforms built with the Kx-Modulad. These files are classified in 3 quality: low, med, hi,
only the med quality (498 ko) is compatible with the Kx-PolyM plug-in.
They must be copied inside the root of plug-in folder.
Don't erase the data.kxw file because the plug-in uses it to locate the waveforms!

2 - Why my host cannot load the SEM modules when the plug-in is loading?
You forgot to copy the "Kx-PolyM-CSE" folder into your Vstplugins folder.

Normally the plug-in copies its embedded files (*.sem, data, etc...) inside a folder with the same name when the plug-in is
initialized for the first time by your host program. But sometime on Vista or Seven that doesn't work with Live,
generally it is a bug about the rights. So this is why the plug-in folder is in the zip ...
You must be logged in administrator not in simple user because you must have all rights on the "vstplugins" folder generally installed in the "Program file" folder which is protected by Windows.

3 - How can I reduce the CPU use?
This plug-in is optimized but if you patch with a wrong way you will increase the CPU use!

- First, do the difference between the source signals. The polyphonic signals use more CPU, one modulation per note played.

Monophonic:
Lfo, Noise, Lfo Eg, SH, Midi Ctrls.

Polyphonic gate on (note on):
Kbd, Vel.

Polyphonic alway running:
Kxmod, Vcos, Ring Modulator, Egs (to release end).

- With the matrix, do not select a source if you don't use it.

- Select off or None on the selectors (sub matrix, ring, filters).

- Set the level of the unused generators to 0 (led off).

- Avoid to use oversampled filters* and the polyphonic oversampled x4 distortion with poly presets!
You need to oversample x4 the distortion only if you work on presets with very high frequencies.

4 -Midi Learn Setting:
The Midi Learn setting is saved in the bank and in the preset.

5 - Beta-testing results:
This is a stable release, it was tested on 32 bits and 64 bits Windows with the main VST hosts:
Cubase SX, Cubase SE, Cubase 5, Samplitude, Orion, Cantabile, Energy XT, Reaper, FL, Live, VstHost, Chainer, Sonar...

6 - Minimum requirements:
Windows (32 or 64): Xp sp2, Vista, Seven...
Any compatible VST 2.3 32 bit host with Asio driver.
Need a vst 32 bridge (jbridge) with some 64 bit hosts (Live 64 bit).
Any old mono SSE2 processors >= : P4, Athlon K8.

This plug-in is not compatible with the old Athlon XP processors!

A 64 bit VST3 version of this plug-in will be available when SE 64 bit will be stable
and when the conversion of my SDK2 32 bit SEM modules to 64 bit modules will be end...
So if you want to use 32 bit VSTs with your 64 bit host and if this one has not a VST
32 bridge (64 bit version of Live), you can use the jbrige 32/64-64/32 vst bridge (20$ only):
http://jstuff.wordpress.com/jbridge.

Note:
Your host and Jbrigde must run in administrator mode:
To solve this, locate theirs shorcuts, right-click them, choose "Properties", and in the "compatibility" tab enable
"Run this program as an administrator option".

The KX77FREE plug-ins are FREEWARES, so 20$, it's a good deal!

7 - Recommended configurations:
All Dual Core or Quad Core configurations with host programs optimized for these processors.

8 - Know problems:

Large Soundfont banks (Modulad and PolyMod):
You can listen an audio glitch during the program change if the GUI editor is closed because the loading process is called by the DSP when the GUI is off. If you use the program change in your host session with large soundfont banks, keep the GUI editor of the plug-in open.
To avoid to use too much memory with large soundfont banks, you can use the free sf2 editor "Viena" provided by:
http://www.synthfont.com

FL Studio:
The plug-in uses less CPU (-25%) and the wav export works fine with these Wrapper options:
- Use fixed size buffer.
- FL 9 and upper -> Allow threaded processing must be enabled (on quad core).
The Midi Learn doesn't work with FL, FL locks the CC for its automation.

Orion:
To change the values of the knob fields, use the "Caps lock" key.

Samplitude 15 (Synth-x16 and Modulad):
Minor graphic bugs with the knobs fields (classic SE knobs),
they appear blank if you choice a preset in the preset list.
You need to click on to see the value.
You should use the plug-in preset popup menu ("Pst", on the bottom).

9 - Midi learn:

All controllers can be edited with the Midi learn (right click).

Caution:
CC 120 = All sounds off
CC 123 = All notes off

The default setting is all parameters set to "none".
The current setting is saved in the bank or in the preset.

*******************

I hope that will help you.


@Syntilla

You know, I never played on Synthi, it was a very good challenge for me!
All I done for this VST, it is just some ideas based on my musician experience and also because I'm good in the empiric method of DSP researches... Dream -> What I want -> What I can do with C++ and SE -> try, tests, listening and if it is right for my brain and my ears, I keep and I finalyze.
Because I do not sell something, I can work without any commercial stress (I'm stressed also but not by the internet timing), I do not follow the end users and the VST market to do hamburgers, I do what I want but I'm listening always my users.

And, it's very important, a lot of peoples help me by sending theirs recordings, docs, worked on the skin, etc...


Special thanks to:

Eric Langou : http://www.novaflash.com
Great and free VST instruments.
http://www.novaflash.com

Burnie is a moderator of instrumentsvirtuels.free.fr.
http://instrumentsvirtuels.free.fr
http://lesitedeburnie.free.fr

Scot Solida is a member of KVR forum.
http://www.kvraudio.com

BLT is a member of Synthé-modulaire forum (Fr).
He done for me good recordings of clean VCS3 filters.
http://www.synthe-modulaire.com

Also Albedo039 who send me his Synthi recordings.
https://soundcloud.com/albedo039

for the program Synthedit : Jeff McClintock
http://www.synthedit.com


About the VCS3:

The VCS3 was created in 1969 by Peter Zinovieff's EMS company.
http://www.ems-synthi.demon.co.uk
Story:
http://en.wikipedia.org/wiki/EMS_VCS_3


VCS3 freeware links:

First SE VCS3 clone by R. Brooks:
http://www.vickers-armstrongs.com/synth ... thiaks.htm

EFM, Synthia 2: http://ele4music.blogspot.com
Ninecows, Cynthia: http://ninecows.dk/cynthia


Xavier

[kx77free]

Re,

Urlwolf@
I tested with last FL 12 and Reaper in x86 and x64, all seems right...

[Syntilla]

... it is just some ideas based on my musician experience ... I do not follow the end users and the VST market to do hamburgers ...

.. is all anyone really needs to know about KX77FREE ...

There's an excellent chapter on EMS in the book Analog Days, available free (without images) as .pdf here: http://www.spontis.se/

And the EMS home page (still over 15 years out of date) now resides here: http://www.emssynthesisers.co.uk/

Richard Brooks's Synthiaks was originally pitched to Robin Woods - current EMS owner, having joined the company just 6 months after it started - as an 'official' emulation, but he declined. It was based on his earlier VCS5, which had a bit of a makeover a few years back as the Triton - http://www.vickers-armstrongs.co.uk/vir ... ritons.htm

The ele4music site has long gone, but Synthia2 is still available from vst4free (and a few other places) - http://www.vst4free.com/free_vst.php?id=753

And I seem to remember Ninecows saying the source files for Cynthia had been lost in a disk crash or something ... so, not likely to be updated.

There are plenty of other Synthi clones out there, too, of course - each with it's own character.
But, payware or free, the KX-Synth-X16 really is the only one worthy of serious attention.